APRS Track Direct

My position About ☰

reset

IZ5OQO-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IZ5OQO-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1754154343	13.88 Volt	130 Pkt	110 Pkt	32 Pcnt
1754154342	13.88 Volt	130 Pkt	110 Pkt	32 Pcnt
1754154042	13.88 Volt	130 Pkt	100 Pkt	31 Pcnt
1754153743	13.88 Volt	130 Pkt	100 Pkt	32 Pcnt
1754153742	13.88 Volt	130 Pkt	100 Pkt	32 Pcnt
1754153442	13.88 Volt	120 Pkt	100 Pkt	31 Pcnt
1754153143	13.88 Volt	110 Pkt	100 Pkt	30 Pcnt
1754153142	13.88 Volt	110 Pkt	100 Pkt	30 Pcnt
1754152842	13.88 Volt	100 Pkt	90 Pkt	28 Pcnt
1754152542	13.88 Volt	100 Pkt	80 Pkt	27 Pcnt
1754152242	13.88 Volt	100 Pkt	90 Pkt	29 Pcnt
1754151945	13.88 Volt	100 Pkt	90 Pkt	28 Pcnt
1754151942	13.88 Volt	100 Pkt	90 Pkt	28 Pcnt
1754151642	13.88 Volt	100 Pkt	80 Pkt	27 Pcnt
1754151344	13.88 Volt	100 Pkt	90 Pkt	28 Pcnt
1754151342	13.88 Volt	100 Pkt	90 Pkt	28 Pcnt
1754151042	13.88 Volt	90 Pkt	80 Pkt	27 Pcnt
1754150747	13.88 Volt	90 Pkt	80 Pkt	25 Pcnt
1754150742	13.88 Volt	90 Pkt	80 Pkt	25 Pcnt
1754150442	13.88 Volt	90 Pkt	80 Pkt	26 Pcnt
1754150143	13.88 Volt	90 Pkt	80 Pkt	25 Pcnt
1754150142	13.88 Volt	90 Pkt	80 Pkt	25 Pcnt
1754149842	13.88 Volt	80 Pkt	70 Pkt	24 Pcnt
1754149542	13.88 Volt	80 Pkt	70 Pkt	23 Pcnt
1754149242	13.88 Volt	80 Pkt	70 Pkt	22 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)