This is the latest recevied telemetry packets stored in our database for station/object YB1JQC-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | RxTraffic* | TxTraffic* | RxDrop* | RSSI* | Voltage* |
---|---|---|---|---|---|
1718714096 | 55 Pkt | 0 Pkt | 0 Pkt | -62 dBm | 5.91 V |
1718712262 | 60 Pkt | 0 Pkt | 0 Pkt | -62 dBm | 5.91 V |
1718710432 | 61 Pkt | 0 Pkt | 0 Pkt | -61 dBm | 5.91 V |
1718708600 | 70 Pkt | 0 Pkt | 0 Pkt | -63 dBm | 5.91 V |
1718706765 | 51 Pkt | 0 Pkt | 0 Pkt | -64 dBm | 5.91 V |
1718704933 | 60 Pkt | 2 Pkt | 1 Pkt | -61 dBm | 5.91 V |
1718703102 | 87 Pkt | 1 Pkt | 1 Pkt | -61 dBm | 5.91 V |
1718701262 | 70 Pkt | 1 Pkt | 0 Pkt | -61 dBm | 5.91 V |
1718699424 | 78 Pkt | 1 Pkt | 0 Pkt | -63 dBm | 5.91 V |
1718697584 | 87 Pkt | 2 Pkt | 0 Pkt | -62 dBm | 5.91 V |
1718695745 | 85 Pkt | 1 Pkt | 0 Pkt | -62 dBm | 5.91 V |
1718693906 | 67 Pkt | 0 Pkt | 0 Pkt | -62 dBm | 5.91 V |
1718692072 | 93 Pkt | 0 Pkt | 0 Pkt | -62 dBm | 5.91 V |
1718690233 | 77 Pkt | 1 Pkt | 1 Pkt | -62 dBm | 5.91 V |
1718688393 | 87 Pkt | 0 Pkt | 0 Pkt | -62 dBm | 5.91 V |
1718686551 | 79 Pkt | 1 Pkt | 0 Pkt | -61 dBm | 5.91 V |
1718684713 | 71 Pkt | 2 Pkt | 1 Pkt | -63 dBm | 5.91 V |
1718682874 | 87 Pkt | 0 Pkt | 0 Pkt | -62 dBm | 5.91 V |
1718681032 | 77 Pkt | 3 Pkt | 1 Pkt | -62 dBm | 5.91 V |
1718679201 | 94 Pkt | 4 Pkt | 1 Pkt | -61 dBm | 5.91 V |
1718677358 | 1 Pkt | 0 Pkt | 0 Pkt | -62 dBm | 5.91 V |
1718677174 | 77 Pkt | 6 Pkt | 1 Pkt | -63 dBm | 5.91 V |
1718675338 | 60 Pkt | 5 Pkt | 0 Pkt | -62 dBm | 5.87 V |
1718673506 | 74 Pkt | 5 Pkt | 0 Pkt | -64 dBm | 5.91 V |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
Voltage: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)