APRS Track Direct

My position About ☰

reset

DG0PD-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DG0PD-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Press*	Hum*	VBat*
1780003540	-100 degC	940.39 hPa	99.57 %	249 V
1780003472	-100 degC	940.39 hPa	99.57 %	248 V
1780003405	-100 degC	940.39 hPa	99.57 %	249 V
1780003270	-100 degC	940.39 hPa	0 %	249 V
1780003202	-100 degC	940.39 hPa	99.57 %	249 V
1780003134	-100 degC	940.39 hPa	99.57 %	249 V
1780003067	-100 degC	940.39 hPa	99.57 %	249 V
1780002999	-100 degC	940.39 hPa	99.57 %	249 V
1780002932	-45.32 degC	940.39 hPa	0 %	248 V
1780002864	-100 degC	940.39 hPa	0 %	249 V
1780002796	-63.54 degC	940.39 hPa	0 %	248 V
1780002729	-100 degC	940.39 hPa	99.57 %	248 V
1780002661	-100 degC	940.39 hPa	99.57 %	249 V
1780002593	-100 degC	940.39 hPa	99.57 %	248 V
1780002526	-100 degC	940.39 hPa	99.57 %	248 V
1780002458	-45.32 degC	940.39 hPa	0 %	247 V
1780002390	-63.54 degC	940.39 hPa	0 %	249 V
1780002323	-63.54 degC	940.39 hPa	0 %	249 V
1780002255	-100 degC	940.39 hPa	0 %	248 V
1780002188	-100 degC	940.39 hPa	99.57 %	249 V
1780002120	-100 degC	940.39 hPa	99.57 %	248 V
1780002052	-100 degC	940.39 hPa	99.57 %	249 V
1780001985	-100 degC	940.39 hPa	99.57 %	249 V
1780001917	-100 degC	940.39 hPa	99.57 %	249 V
1780001850	-2.98 degC	940.39 hPa	0 %	248 V

*Used Equation Coefficients:

Temp: 0, 0.588, -100

Press: 0, 4.3137255, 0

Hum: 0, 0.392, 0

O3: 0, 1, 0

VBat: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)