This is the latest recevied telemetry packets stored in our database for station/object E79VTR-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1786785893 | 479 | 0 | 0 | 0 | 0 |
| 1786784689 | 478 | 0 | 0 | 0 | 0 |
| 1786783483 | 480 | 0 | 0 | 0 | 0 |
| 1786782271 | 479 | 0 | 0 | 0 | 0 |
| 1786781061 | 478 | 0 | 0 | 0 | 0 |
| 1786779851 | 480 | 0 | 0 | 0 | 0 |
| 1786778637 | 478 | 0 | 0 | 0 | 0 |
| 1786777424 | 479 | 0 | 0 | 0 | 0 |
| 1786776216 | 478 | 0 | 0 | 0 | 0 |
| 1786775008 | 479 | 0 | 0 | 0 | 0 |
| 1786773800 | 479 | 0 | 0 | 0 | 0 |
| 1786772591 | 479 | 0 | 0 | 0 | 0 |
| 1786771381 | 478 | 0 | 0 | 0 | 0 |
| 1786770170 | 478 | 0 | 0 | 0 | 0 |
| 1786768955 | 480 | 0 | 0 | 0 | 0 |
| 1786767742 | 475 | 0 | 0 | 0 | 0 |
| 1786766527 | 476 | 0 | 0 | 0 | 0 |
| 1786765311 | 479 | 0 | 0 | 0 | 0 |
| 1786764101 | 478 | 0 | 0 | 0 | 0 |
| 1786762887 | 475 | 0 | 0 | 0 | 0 |
| 1786761667 | 476 | 0 | 0 | 0 | 0 |
| 1786760451 | 478 | 0 | 0 | 0 | 0 |
| 1786759242 | 480 | 0 | 0 | 0 | 0 |
| 1786758030 | 478 | 0 | 0 | 0 | 0 |
| 1786756817 | 480 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)