APRS Track Direct

My position About ☰

reset

DB0HFT-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DB0HFT-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Cpu*	ATx*	FTx*	CPUld*
1754124309	44 Grad.C	27.3 Grad.C	28.3 Grad.C	6 perc
1754123753	44 Grad.C	27.3 Grad.C	28.2 Grad.C	8 perc
1754123276	44 Grad.C	27.3 Grad.C	28.1 Grad.C	8 perc
1754122759	44.5 Grad.C	27.1 Grad.C	28.2 Grad.C	6 perc
1754122160	44 Grad.C	27.1 Grad.C	28.6 Grad.C	3 perc
1754121637	44 Grad.C	27.1 Grad.C	28 Grad.C	5 perc
1754121117	44.5 Grad.C	27 Grad.C	28 Grad.C	8 perc
1754120600	44 Grad.C	27 Grad.C	28 Grad.C	9 perc
1754120037	45 Grad.C	27 Grad.C	27.8 Grad.C	5 perc
1754119540	44 Grad.C	26.8 Grad.C	27.8 Grad.C	8 perc
1754119040	44 Grad.C	26.7 Grad.C	28 Grad.C	6 perc
1754118465	44 Grad.C	26.6 Grad.C	28.2 Grad.C	5 perc
1754117865	43.4 Grad.C	26.5 Grad.C	27.4 Grad.C	6 perc
1754117309	42.9 Grad.C	26.5 Grad.C	27.5 Grad.C	8 perc
1754116710	43.4 Grad.C	26.5 Grad.C	27.8 Grad.C	6 perc
1754116149	43.4 Grad.C	26.4 Grad.C	27.4 Grad.C	8 perc
1754115589	44 Grad.C	26.3 Grad.C	27.4 Grad.C	6 perc
1754115025	43.4 Grad.C	26.3 Grad.C	27.7 Grad.C	5 perc
1754114423	43.4 Grad.C	26.2 Grad.C	27.3 Grad.C	9 perc
1754113862	43.4 Grad.C	26.3 Grad.C	27.4 Grad.C	5 perc
1754113307	44 Grad.C	26.4 Grad.C	27.6 Grad.C	8 perc
1754112710	43.4 Grad.C	26.5 Grad.C	27.5 Grad.C	3 perc
1754112130	44 Grad.C	26.4 Grad.C	27.5 Grad.C	3 perc
1754111598	44 Grad.C	26.4 Grad.C	27.6 Grad.C	5 perc
1754111116	43.4 Grad.C	26.4 Grad.C	28.1 Grad.C	5 perc

*Used Equation Coefficients:

Cpu: 0, 0.1, 0

ATx: 0, 0.1, 0

FTx: 0, 0.1, 0

CPUld: 0, 1, 0

MEMl: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)