APRS Track Direct

My position About ☰

reset

ON4BCY-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object ON4BCY-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1786747682	12 Volt	1280 Pkt	150 Pkt	78 Pcnt
1786747681	12 Volt	1280 Pkt	150 Pkt	78 Pcnt
1786747381	11.93 Volt	1280 Pkt	150 Pkt	78 Pcnt
1786747082	12 Volt	1280 Pkt	150 Pkt	80 Pcnt
1786747081	12 Volt	1280 Pkt	150 Pkt	80 Pcnt
1786746781	11.93 Volt	1280 Pkt	150 Pkt	79 Pcnt
1786746482	11.93 Volt	1280 Pkt	150 Pkt	80 Pcnt
1786746481	11.93 Volt	1280 Pkt	150 Pkt	80 Pcnt
1786746181	11.93 Volt	1280 Pkt	150 Pkt	80 Pcnt
1786745882	12 Volt	1280 Pkt	150 Pkt	80 Pcnt
1786745881	12 Volt	1280 Pkt	150 Pkt	80 Pcnt
1786745581	12 Volt	1280 Pkt	150 Pkt	79 Pcnt
1786745282	12 Volt	1280 Pkt	150 Pkt	79 Pcnt
1786745281	12 Volt	1280 Pkt	150 Pkt	79 Pcnt
1786744981	12 Volt	1280 Pkt	140 Pkt	78 Pcnt
1786744682	11.93 Volt	1280 Pkt	130 Pkt	78 Pcnt
1786744681	11.93 Volt	1280 Pkt	130 Pkt	78 Pcnt
1786744381	11.93 Volt	1280 Pkt	130 Pkt	78 Pcnt
1786744082	12 Volt	1280 Pkt	120 Pkt	78 Pcnt
1786744081	12 Volt	1280 Pkt	120 Pkt	78 Pcnt
1786743781	11.93 Volt	1280 Pkt	110 Pkt	79 Pcnt
1786743482	11.93 Volt	1280 Pkt	110 Pkt	80 Pcnt
1786743481	11.93 Volt	1280 Pkt	110 Pkt	80 Pcnt
1786743181	11.93 Volt	1280 Pkt	100 Pkt	82 Pcnt
1786742882	11.93 Volt	1280 Pkt	100 Pkt	82 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)