This is the latest recevied telemetry packets stored in our database for station/object LIST-4A. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Baro* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1790642032 | 19.6 deg C | 55.6 % | 1019.7 hPa | 0 | 0 |
| 1790641128 | 19.7 deg C | 55.7 % | 1020.4 hPa | 0 | 0 |
| 1790640224 | 19.9 deg C | 54.9 % | 1020.3 hPa | 0 | 0 |
| 1790638421 | 20.3 deg C | 54.4 % | 1021.3 hPa | 0 | 0 |
| 1790637522 | 20.4 deg C | 54.4 % | 1021 hPa | 0 | 0 |
| 1790636617 | 20.6 deg C | 54.1 % | 1019.9 hPa | 0 | 0 |
| 1790635721 | 20.7 deg C | 53.9 % | 1019.9 hPa | 0 | 0 |
| 1790634813 | 20.9 deg C | 53.7 % | 1018.7 hPa | 0 | 0 |
| 1790633915 | 21.1 deg C | 53.4 % | 1019.7 hPa | 0 | 0 |
| 1790633015 | 21.2 deg C | 53.1 % | 1019.7 hPa | 0 | 0 |
| 1790632117 | 21.4 deg C | 52.6 % | 1020.6 hPa | 0 | 0 |
| 1790631210 | 21.5 deg C | 52.4 % | 1020 hPa | 0 | 0 |
| 1790630307 | 21.6 deg C | 52.3 % | 1020.2 hPa | 0 | 0 |
| 1790629405 | 21.8 deg C | 52.2 % | 1018.1 hPa | 0 | 0 |
| 1790628506 | 21.9 deg C | 51.8 % | 1021.6 hPa | 0 | 0 |
| 1790627605 | 22 deg C | 51.5 % | 1019.5 hPa | 0 | 0 |
| 1790626706 | 22.3 deg C | 51.1 % | 1019.7 hPa | 0 | 0 |
| 1790625800 | 22.5 deg C | 50.6 % | 1019.3 hPa | 0 | 0 |
| 1790624898 | 22.7 deg C | 50 % | 1020.3 hPa | 0 | 0 |
| 1790623999 | 23 deg C | 49.7 % | 1019.4 hPa | 0 | 0 |
| 1790623094 | 23.2 deg C | 49 % | 1020.3 hPa | 0 | 0 |
| 1790622193 | 23.4 deg C | 49 % | 1019.6 hPa | 0 | 0 |
| 1790621297 | 23.7 deg C | 48.8 % | 1018.4 hPa | 0 | 0 |
| 1790620397 | 24 deg C | 48.1 % | 1018.1 hPa | 0 | 0 |
| 1790619498 | 24.2 deg C | 47.9 % | 1020.6 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Baro: 0, 0.1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)