This is the latest recevied telemetry packets stored in our database for station/object N0FUN-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | CPUTemp* | SysLoad* | RAMUse* | DiskUse* | Iac* |
|---|---|---|---|---|---|
| 1792277838 | 30.4 degC | 0 % | 14 % | 3 % | 0.33 Amps |
| 1792277239 | 31.2 degC | 0 % | 14 % | 3 % | 0.33 Amps |
| 1792276639 | 30.4 degC | 56 % | 14 % | 3 % | 0.33 Amps |
| 1792276038 | 30.4 degC | 6 % | 14 % | 3 % | 0.33 Amps |
| 1792275439 | 30.4 degC | 8 % | 14 % | 3 % | 0.33 Amps |
| 1792274839 | 31.2 degC | 14 % | 14 % | 3 % | 0.33 Amps |
| 1792274239 | 30.8 degC | 17 % | 14 % | 3 % | 0.33 Amps |
| 1792273639 | 31.2 degC | 21 % | 14 % | 3 % | 0.33 Amps |
| 1792273038 | 30.4 degC | 11 % | 14 % | 3 % | 0.34 Amps |
| 1792272439 | 31.2 degC | 17 % | 14 % | 3 % | 0.33 Amps |
| 1792271839 | 30.4 degC | 9 % | 14 % | 3 % | 0.32 Amps |
| 1792271239 | 29.6 degC | 12 % | 14 % | 3 % | 0.32 Amps |
| 1792270638 | 30.8 degC | 15 % | 14 % | 3 % | 0.33 Amps |
| 1792270039 | 30.8 degC | 13 % | 14 % | 3 % | 0.33 Amps |
| 1792269439 | 30.4 degC | 15 % | 14 % | 3 % | 0.33 Amps |
| 1792268839 | 30.4 degC | 7 % | 14 % | 3 % | 0.33 Amps |
| 1792268238 | 30.8 degC | 9 % | 14 % | 3 % | 0.33 Amps |
| 1792267639 | 30.4 degC | 5 % | 14 % | 3 % | 0.33 Amps |
| 1792267039 | 29.6 degC | 2 % | 14 % | 3 % | 0.33 Amps |
| 1792266439 | 31.2 degC | 4 % | 13 % | 3 % | 0.33 Amps |
| 1792265839 | 30.8 degC | 2 % | 13 % | 3 % | 0.34 Amps |
| 1792265238 | 30.4 degC | 5 % | 14 % | 3 % | 0.33 Amps |
| 1792264639 | 30.4 degC | 4 % | 14 % | 3 % | 0.33 Amps |
| 1792264039 | 30.8 degC | 3 % | 14 % | 3 % | 0.32 Amps |
| 1792263439 | 31.2 degC | 6 % | 13 % | 3 % | 0.33 Amps |
*Used Equation Coefficients:
CPUTemp: 0, 0.4, 0
SysLoad: 0, 1, 0
RAMUse: 0, 1, 0
DiskUse: 0, 1, 0
Iac: 0, 0.01, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)