This is the latest recevied telemetry packets stored in our database for station/object DL3MC-21. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Press* | Temp.in* | Hum* | QNH* | Temp.out* |
|---|---|---|---|---|---|
| 1790639782 | 1006.3 hPa | 16.5 C deg | 100 % | 1022.9 hPa | 0 C deg |
| 1790637970 | 1006 hPa | 17 C deg | 100 % | 1022.5 hPa | 0 C deg |
| 1790636152 | 1006 hPa | 17.2 C deg | 100 % | 1022.5 hPa | 0 C deg |
| 1790632525 | 1005.8 hPa | 18 C deg | 100 % | 1022.3 hPa | 0 C deg |
| 1790630710 | 1005.7 hPa | 18.1 C deg | 100 % | 1022.2 hPa | 0 C deg |
| 1790628892 | 1005.5 hPa | 18.5 C deg | 100 % | 1022 hPa | 0 C deg |
| 1790627079 | 1005.4 hPa | 19.2 C deg | 100 % | 1021.9 hPa | 0 C deg |
| 1790625264 | 1005.5 hPa | 19.5 C deg | 100 % | 1021.9 hPa | 0 C deg |
| 1790623451 | 1005.4 hPa | 19.9 C deg | 100 % | 1021.8 hPa | 0 C deg |
| 1790621633 | 1005.5 hPa | 20.4 C deg | 100 % | 1021.8 hPa | 0 C deg |
| 1790619817 | 1005.3 hPa | 21.1 C deg | 85.3 % | 1021.6 hPa | 0 C deg |
| 1790618003 | 1005.3 hPa | 21.7 C deg | 76.3 % | 1021.6 hPa | 0 C deg |
| 1790616188 | 1005.1 hPa | 22.1 C deg | 71 % | 1021.3 hPa | 0 C deg |
| 1790614374 | 1004.9 hPa | 23.1 C deg | 63.2 % | 1021.1 hPa | 0 C deg |
| 1790564557 | 1005 hPa | 12.7 C deg | 100 % | 1021.8 hPa | 0 C deg |
| 1790562741 | 1004.9 hPa | 12.8 C deg | 100 % | 1021.7 hPa | 0 C deg |
| 1790560923 | 1004.7 hPa | 12.7 C deg | 100 % | 1021.4 hPa | 0 C deg |
| 1790559111 | 1004.7 hPa | 12.8 C deg | 100 % | 1021.5 hPa | 0 C deg |
| 1790557297 | 1004.7 hPa | 12.9 C deg | 100 % | 1021.4 hPa | 0 C deg |
| 1790555480 | 1004.7 hPa | 13.2 C deg | 100 % | 1021.5 hPa | 0 C deg |
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
QNH: 0, 1, 0
Temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)