APRS Track Direct

My position About ☰

reset

DL3MC-20 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DL3MC-20. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Press*	Temp.in*	Hum*	QNH*	Temp.out*
1778008882	992.4 hPa	21.9 C deg	39 %	1008.2 hPa	0 C deg
1778008880	992.4 hPa	21.9 C deg	39 %	1008.2 hPa	0 C deg
1778007065	992.2 hPa	22.5 C deg	38 %	1008 hPa	0 C deg
1778005254	992.2 hPa	23 C deg	37.3 %	1008 hPa	0 C deg
1778005250	992.2 hPa	23 C deg	37.3 %	1008 hPa	0 C deg
1778003434	992.3 hPa	23.6 C deg	36.5 %	1008 hPa	0 C deg
1778001619	992.4 hPa	24.1 C deg	36.1 %	1008.1 hPa	0 C deg
1777999806	992.4 hPa	24.6 C deg	36.2 %	1008.1 hPa	0 C deg
1777999804	992.4 hPa	24.6 C deg	36.2 %	1008.1 hPa	0 C deg
1777997989	992.6 hPa	25.5 C deg	34.5 %	1008.2 hPa	0 C deg
1777996183	992.4 hPa	26.4 C deg	33.5 %	1008 hPa	0 C deg
1777996174	992.4 hPa	26.4 C deg	33.5 %	1008 hPa	0 C deg
1777994359	992.4 hPa	27 C deg	33.3 %	1007.9 hPa	0 C deg
1777992544	992.3 hPa	28.9 C deg	30.4 %	1007.8 hPa	0 C deg
1777990735	991.7 hPa	30.2 C deg	27.2 %	1007 hPa	0 C deg
1777990729	991.7 hPa	30.2 C deg	27.2 %	1007 hPa	0 C deg
1777988919	991.8 hPa	30.9 C deg	27 %	1007.2 hPa	0 C deg
1777988914	991.8 hPa	30.9 C deg	27 %	1007.2 hPa	0 C deg
1777987100	992 hPa	31.3 C deg	27.9 %	1007.4 hPa	0 C deg
1777987099	992 hPa	31.3 C deg	27.9 %	1007.4 hPa	0 C deg
1777985294	992.2 hPa	31.3 C deg	28.6 %	1007.5 hPa	0 C deg
1777985284	992.2 hPa	31.3 C deg	28.6 %	1007.5 hPa	0 C deg
1777983471	992.4 hPa	31.9 C deg	27.7 %	1007.8 hPa	0 C deg
1777983468	992.4 hPa	31.9 C deg	27.7 %	1007.8 hPa	0 C deg
1777981656	992.8 hPa	29.6 C deg	30.7 %	1008.3 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)