This is the latest recevied telemetry packets stored in our database for station/object SP9JZ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1778033031 | 133 Count | 0 Count | 0 Count | 3.87 VDC | 0.08 VDC |
| 1778031230 | 132 Count | 0 Count | 0 Count | 3.87 VDC | 0.08 VDC |
| 1778029428 | 131 Count | 0 Count | 0 Count | 3.87 VDC | 0.08 VDC |
| 1778027627 | 130 Count | 0 Count | 0 Count | 3.87 VDC | 0.08 VDC |
| 1778025826 | 129 Count | 0 Count | 0 Count | 3.87 VDC | 0.08 VDC |
| 1778024023 | 128 Count | 0 Count | 0 Count | 3.88 VDC | 0.08 VDC |
| 1778022221 | 127 Count | 0 Count | 0 Count | 3.88 VDC | 0.08 VDC |
| 1778020420 | 126 Count | 0 Count | 0 Count | 3.88 VDC | 0.08 VDC |
| 1778018619 | 125 Count | 0 Count | 0 Count | 3.89 VDC | 0.08 VDC |
| 1778016817 | 124 Count | 0 Count | 0 Count | 3.89 VDC | 0.08 VDC |
| 1778015016 | 123 Count | 0 Count | 0 Count | 3.89 VDC | 0.08 VDC |
| 1778013213 | 122 Count | 0 Count | 0 Count | 3.89 VDC | 0.08 VDC |
| 1778011411 | 121 Count | 0 Count | 0 Count | 3.9 VDC | 0.08 VDC |
| 1778009610 | 120 Count | 0 Count | 0 Count | 3.9 VDC | 0.08 VDC |
| 1778007809 | 119 Count | 0 Count | 0 Count | 3.9 VDC | 0.08 VDC |
| 1778006007 | 118 Count | 0 Count | 0 Count | 3.9 VDC | 0.08 VDC |
| 1778004206 | 117 Count | 0 Count | 0 Count | 3.91 VDC | 0.08 VDC |
| 1778003592 | 116 Count | 0 Count | 0 Count | 3.91 VDC | 0.08 VDC |
| 1778001788 | 115 Count | 0 Count | 0 Count | 3.92 VDC | 0.08 VDC |
| 1777999986 | 114 Count | 0 Count | 0 Count | 3.94 VDC | 0.08 VDC |
| 1777998185 | 113 Count | 0 Count | 0 Count | 3.97 VDC | 0.08 VDC |
| 1777996383 | 112 Count | 0 Count | 0 Count | 3.95 VDC | 0.08 VDC |
| 1777994568 | 111 Count | 0 Count | 0 Count | 3.92 VDC | 0.08 VDC |
| 1777992767 | 110 Count | 0 Count | 0 Count | 3.92 VDC | 0.08 VDC |
| 1777990965 | 109 Count | 0 Count | 0 Count | 3.91 VDC | 0.08 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)