APRS Track Direct

My position About ☰

reset

K2CSN-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object K2CSN-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RFIn*	RFiGate*	DigiRpt*	Temp*
1782509893	6 Pkts	5 Pkts	1 Pkts	42 C
1782508093	5 Pkts	4 Pkts	1 Pkts	42 C
1782506293	7 Pkts	7 Pkts	2 Pkts	41 C
1782504493	2 Pkts	2 Pkts	1 Pkts	39 C
1782502694	0 Pkts	0 Pkts	0 Pkts	40 C
1782500894	0 Pkts	0 Pkts	0 Pkts	37 C
1782499094	1 Pkts	1 Pkts	1 Pkts	35 C
1782497295	0 Pkts	0 Pkts	0 Pkts	36 C
1782495494	3 Pkts	3 Pkts	1 Pkts	36 C
1782493694	26 Pkts	23 Pkts	4 Pkts	39 C
1782491895	14 Pkts	14 Pkts	1 Pkts	36 C
1782490095	1 Pkts	1 Pkts	1 Pkts	36 C
1782488295	8 Pkts	8 Pkts	4 Pkts	36 C
1782486495	40 Pkts	36 Pkts	4 Pkts	38 C
1782484694	129 Pkts	124 Pkts	9 Pkts	43 C
1782482895	152 Pkts	144 Pkts	4 Pkts	43 C
1782481093	122 Pkts	118 Pkts	21 Pkts	40 C
1782479293	130 Pkts	124 Pkts	25 Pkts	37 C
1782477493	142 Pkts	136 Pkts	14 Pkts	36 C
1782475693	114 Pkts	110 Pkts	6 Pkts	35 C
1782473893	118 Pkts	114 Pkts	6 Pkts	35 C
1782472093	127 Pkts	124 Pkts	4 Pkts	34 C
1782470293	131 Pkts	126 Pkts	9 Pkts	33 C
1782468493	114 Pkts	106 Pkts	7 Pkts	33 C
1782466694	116 Pkts	106 Pkts	4 Pkts	34 C

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)