This is the latest recevied telemetry packets stored in our database for station/object IU4DKT-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1792255525 | 137 | 93 | 9 | 1490 | 67 |
| 1792255225 | 157 | 93 | 12 | 1464 | 68 |
| 1792254925 | 164 | 93 | 9 | 1436 | 69 |
| 1792254625 | 145 | 92 | 7 | 1383 | 69 |
| 1792254325 | 148 | 93 | 5 | 1363 | 71 |
| 1792254025 | 142 | 93 | 5 | 1342 | 70 |
| 1792253725 | 123 | 91 | 5 | 1339 | 71 |
| 1792253425 | 147 | 93 | 3 | 1326 | 73 |
| 1792253125 | 156 | 94 | 0 | 1311 | 74 |
| 1792252825 | 138 | 93 | 2 | 1326 | 75 |
| 1792252525 | 124 | 93 | 3 | 1340 | 75 |
| 1792252225 | 132 | 94 | 2 | 1336 | 76 |
| 1792251925 | 146 | 95 | 2 | 1338 | 77 |
| 1792251625 | 152 | 93 | 3 | 1342 | 77 |
| 1792251325 | 165 | 93 | 3 | 1345 | 77 |
| 1792251025 | 142 | 91 | 2 | 1342 | 77 |
| 1792250725 | 136 | 90 | 2 | 1346 | 77 |
| 1792250425 | 143 | 91 | 3 | 1352 | 78 |
| 1792250125 | 145 | 89 | 3 | 1354 | 78 |
| 1792249825 | 154 | 88 | 2 | 1347 | 78 |
| 1792249525 | 147 | 87 | 2 | 1350 | 78 |
| 1792249225 | 152 | 86 | 3 | 1355 | 78 |
| 1792248925 | 147 | 85 | 3 | 1359 | 78 |
| 1792248625 | 126 | 83 | 2 | 1354 | 78 |
| 1792248325 | 123 | 83 | 1 | 1357 | 78 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)