APRS Track Direct

My position About ☰

reset

HP1CDW-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HP1CDW-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	EffTo*
1836274846	14.03 Volt	180 Pkt	40 Pkt	58 Pcnt	49 Pcnt
1836274246	14.03 Volt	180 Pkt	40 Pkt	56 Pcnt	49 Pcnt
1770215050	14.03 Volt	230 Pkt	70 Pkt	73 Pcnt	51 Pcnt
1770214450	14.03 Volt	230 Pkt	70 Pkt	73 Pcnt	51 Pcnt
1770213850	14.03 Volt	240 Pkt	70 Pkt	72 Pcnt	51 Pcnt
1770213250	14.03 Volt	250 Pkt	70 Pkt	73 Pcnt	51 Pcnt
1770212650	14.03 Volt	240 Pkt	70 Pkt	74 Pcnt	51 Pcnt
1770212050	14.03 Volt	220 Pkt	60 Pkt	74 Pcnt	51 Pcnt
1770211450	14.03 Volt	210 Pkt	50 Pkt	75 Pcnt	51 Pcnt
1770210850	14.03 Volt	210 Pkt	50 Pkt	74 Pcnt	51 Pcnt
1770210250	14.03 Volt	210 Pkt	50 Pkt	74 Pcnt	51 Pcnt
1770209650	14.03 Volt	180 Pkt	40 Pkt	71 Pcnt	51 Pcnt
1770209050	14.03 Volt	180 Pkt	40 Pkt	71 Pcnt	51 Pcnt
1770208450	14.03 Volt	170 Pkt	30 Pkt	71 Pcnt	51 Pcnt
1770207850	14.03 Volt	180 Pkt	40 Pkt	71 Pcnt	51 Pcnt
1770207250	14.03 Volt	180 Pkt	40 Pkt	70 Pcnt	51 Pcnt
1770206651	14.03 Volt	180 Pkt	40 Pkt	69 Pcnt	51 Pcnt
1770206050	14.03 Volt	180 Pkt	40 Pkt	71 Pcnt	51 Pcnt
1770205450	14.03 Volt	180 Pkt	40 Pkt	72 Pcnt	51 Pcnt
1770204851	14.03 Volt	180 Pkt	40 Pkt	74 Pcnt	51 Pcnt
1770204251	14.03 Volt	170 Pkt	40 Pkt	71 Pcnt	51 Pcnt
1770203651	14.03 Volt	170 Pkt	40 Pkt	74 Pcnt	51 Pcnt
1770203051	14.03 Volt	160 Pkt	30 Pkt	77 Pcnt	51 Pcnt
1770202451	14.03 Volt	160 Pkt	30 Pkt	75 Pcnt	51 Pcnt
1770201851	14.03 Volt	180 Pkt	40 Pkt	74 Pcnt	51 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

EffTo: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)