This is the latest recevied telemetry packets stored in our database for station/object W7SAR-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Temp* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1778056787 | 12.45 Volts | 56.89 Deg.F | 0 | 0 | 0 |
| 1778056185 | 12.92 Volts | 57.17 Deg.F | 0 | 0 | 0 |
| 1778054987 | 12.42 Volts | 57.17 Deg.F | 0 | 0 | 0 |
| 1778053188 | 12.6 Volts | 58.05 Deg.F | 0 | 0 | 0 |
| 1778051989 | 12.72 Volts | 58.05 Deg.F | 0 | 0 | 0 |
| 1778051390 | 13.16 Volts | 58.05 Deg.F | 0 | 0 | 0 |
| 1778050790 | 12.57 Volts | 58.93 Deg.F | 0 | 0 | 0 |
| 1778048992 | 12.6 Volts | 59.81 Deg.F | 0 | 0 | 0 |
| 1778048392 | 12.8 Volts | 59.81 Deg.F | 0 | 0 | 0 |
| 1778047193 | 12.48 Volts | 59.81 Deg.F | 0 | 0 | 0 |
| 1778045994 | 12.86 Volts | 59.81 Deg.F | 0 | 0 | 0 |
| 1778042994 | 12.48 Volts | 60.69 Deg.F | 0 | 0 | 0 |
| 1778036397 | 12.72 Volts | 64.2 Deg.F | 0 | 0 | 0 |
| 1778030994 | 13.1 Volts | 73.87 Deg.F | 0 | 0 | 0 |
| 1778029794 | 12.45 Volts | 74.75 Deg.F | 0 | 0 | 0 |
| 1778027392 | 12.1 Volts | 78.27 Deg.F | 0 | 0 | 0 |
| 1778026191 | 12.16 Volts | 80.03 Deg.F | 0 | 0 | 0 |
| 1778025591 | 12.16 Volts | 80.91 Deg.F | 0 | 0 | 0 |
| 1778020185 | 12.45 Volts | 68.6 Deg.F | 0 | 0 | 0 |
| 1778018983 | 13.21 Volts | 65.08 Deg.F | 0 | 0 | 0 |
| 1778014784 | 12.63 Volts | 70.36 Deg.F | 0 | 0 | 0 |
| 1778011784 | 12.8 Volts | 67.72 Deg.F | 0 | 0 | 0 |
| 1778009984 | 11.93 Volts | 67.72 Deg.F | 0 | 0 | 0 |
| 1778003983 | 11.93 Volts | 64.2 Deg.F | 0 | 0 | 0 |
| 1778002184 | 11.95 Volts | 62.45 Deg.F | 0 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 0.0293, 0
Temp: 0, 0.88, -459.67
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)