This is the latest recevied telemetry packets stored in our database for station/object VK2XSO-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1744789432 | 161 | 160 | 248 | 0 | 0 |
| 1744789070 | 160 | 161 | 248 | 0 | 0 |
| 1744788709 | 160 | 161 | 248 | 0 | 0 |
| 1744787985 | 161 | 160 | 248 | 0 | 0 |
| 1744787620 | 160 | 160 | 248 | 0 | 0 |
| 1744785810 | 161 | 160 | 248 | 0 | 0 |
| 1744785448 | 161 | 160 | 247 | 0 | 0 |
| 1744785087 | 161 | 160 | 247 | 0 | 0 |
| 1744783277 | 161 | 160 | 248 | 0 | 0 |
| 1744782917 | 161 | 160 | 248 | 0 | 0 |
| 1744782554 | 161 | 160 | 248 | 0 | 0 |
| 1744781106 | 161 | 160 | 248 | 0 | 0 |
| 1744780745 | 161 | 160 | 248 | 0 | 0 |
| 1744780382 | 161 | 160 | 247 | 0 | 0 |
| 1744780020 | 161 | 160 | 248 | 0 | 0 |
| 1744779659 | 161 | 160 | 248 | 0 | 0 |
| 1744779297 | 161 | 161 | 248 | 0 | 0 |
| 1744778935 | 161 | 160 | 247 | 0 | 0 |
| 1744778573 | 161 | 160 | 248 | 0 | 0 |
| 1744778212 | 162 | 160 | 247 | 0 | 0 |
| 1744777849 | 161 | 160 | 248 | 0 | 0 |
| 1744776402 | 160 | 161 | 248 | 0 | 0 |
| 1744776040 | 160 | 160 | 248 | 0 | 0 |
| 1744775679 | 160 | 160 | 248 | 0 | 0 |
| 1744775317 | 160 | 160 | 248 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)