This is the latest recevied telemetry packets stored in our database for station/object SR3DPX. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1778012567 | 121 | 200 | 65 | 0 | 0 |
| 1778011662 | 98 | 175 | 53 | 0 | 0 |
| 1778010756 | 88 | 148 | 46 | 0 | 0 |
| 1778009938 | 79 | 121 | 40 | 0 | 0 |
| 1778009037 | 75 | 110 | 37 | 0 | 0 |
| 1778008136 | 64 | 91 | 31 | 0 | 0 |
| 1778007236 | 57 | 71 | 27 | 0 | 0 |
| 1778006335 | 49 | 57 | 22 | 0 | 0 |
| 1778005434 | 34 | 29 | 18 | 0 | 0 |
| 1778004536 | 17 | 11 | 9 | 0 | 0 |
| 1778003635 | 1011 | 970 | 525 | 0 | 0 |
| 1778002734 | 977 | 952 | 508 | 0 | 0 |
| 1778001836 | 942 | 932 | 491 | 0 | 0 |
| 1778000933 | 908 | 913 | 474 | 0 | 0 |
| 1778000032 | 862 | 889 | 452 | 0 | 0 |
| 1777999131 | 842 | 877 | 442 | 0 | 0 |
| 1777998230 | 822 | 864 | 432 | 0 | 0 |
| 1777997352 | 794 | 848 | 418 | 0 | 0 |
| 1777996451 | 774 | 836 | 408 | 0 | 0 |
| 1777995546 | 740 | 800 | 391 | 0 | 0 |
| 1777994649 | 675 | 739 | 360 | 0 | 0 |
| 1777993744 | 607 | 655 | 323 | 0 | 0 |
| 1777992843 | 548 | 588 | 288 | 0 | 0 |
| 1777991040 | 384 | 439 | 202 | 0 | 0 |
| 1777990139 | 330 | 385 | 174 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)