This is the latest recevied telemetry packets stored in our database for station/object DL9DMN-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vin* | Rx1h* | Dg1h* | Eff1h* | A5* |
|---|---|---|---|---|---|
| 1786726860 | 13.88 Volt | 220 Pkt | 0 Pkt | 80 Pcnt | 0 None |
| 1786726560 | 13.88 Volt | 230 Pkt | 0 Pkt | 77 Pcnt | 0 None |
| 1786726260 | 13.88 Volt | 240 Pkt | 0 Pkt | 77 Pcnt | 0 None |
| 1786725960 | 13.88 Volt | 250 Pkt | 0 Pkt | 77 Pcnt | 0 None |
| 1786725660 | 13.88 Volt | 250 Pkt | 0 Pkt | 78 Pcnt | 0 None |
| 1786725360 | 13.88 Volt | 250 Pkt | 0 Pkt | 77 Pcnt | 0 None |
| 1786725060 | 13.95 Volt | 230 Pkt | 0 Pkt | 76 Pcnt | 0 None |
| 1786724760 | 13.88 Volt | 220 Pkt | 0 Pkt | 77 Pcnt | 0 None |
| 1786724460 | 13.88 Volt | 190 Pkt | 0 Pkt | 75 Pcnt | 0 None |
| 1786724160 | 13.88 Volt | 180 Pkt | 0 Pkt | 76 Pcnt | 0 None |
| 1786723860 | 13.88 Volt | 150 Pkt | 0 Pkt | 73 Pcnt | 0 None |
| 1786723560 | 13.88 Volt | 120 Pkt | 0 Pkt | 67 Pcnt | 0 None |
| 1786723261 | 13.88 Volt | 100 Pkt | 0 Pkt | 62 Pcnt | 0 None |
| 1786722960 | 13.88 Volt | 80 Pkt | 0 Pkt | 63 Pcnt | 0 None |
| 1786722661 | 13.88 Volt | 70 Pkt | 0 Pkt | 64 Pcnt | 0 None |
| 1786722360 | 13.88 Volt | 60 Pkt | 0 Pkt | 61 Pcnt | 0 None |
| 1786722061 | 13.88 Volt | 60 Pkt | 0 Pkt | 60 Pcnt | 0 None |
| 1786721761 | 13.88 Volt | 50 Pkt | 0 Pkt | 60 Pcnt | 0 None |
| 1786721461 | 13.88 Volt | 50 Pkt | 0 Pkt | 61 Pcnt | 0 None |
| 1786721161 | 13.88 Volt | 60 Pkt | 0 Pkt | 63 Pcnt | 0 None |
| 1786720861 | 13.88 Volt | 60 Pkt | 0 Pkt | 64 Pcnt | 0 None |
| 1786720561 | 13.88 Volt | 60 Pkt | 0 Pkt | 66 Pcnt | 0 None |
| 1786720261 | 13.95 Volt | 70 Pkt | 0 Pkt | 68 Pcnt | 0 None |
| 1786719961 | 13.88 Volt | 80 Pkt | 0 Pkt | 70 Pcnt | 0 None |
| 1786719661 | 13.88 Volt | 80 Pkt | 0 Pkt | 76 Pcnt | 0 None |
*Used Equation Coefficients:
Vin: 0, 0.075, 0
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
A5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)