APRS Track Direct

My position About ☰

reset

KB4KY Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KB4KY. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1750199158	13.58 Volt	910 Pkt	210 Pkt	70 Pcnt
1750198257	13.58 Volt	890 Pkt	210 Pkt	70 Pcnt
1750197367	13.58 Volt	900 Pkt	210 Pkt	70 Pcnt
1750196465	13.58 Volt	910 Pkt	220 Pkt	70 Pcnt
1750195564	13.58 Volt	900 Pkt	210 Pkt	69 Pcnt
1750194651	13.58 Volt	900 Pkt	220 Pkt	70 Pcnt
1750193759	13.58 Volt	910 Pkt	210 Pkt	70 Pcnt
1750192858	13.58 Volt	930 Pkt	210 Pkt	71 Pcnt
1750191950	13.42 Volt	960 Pkt	210 Pkt	73 Pcnt
1750191057	13.58 Volt	970 Pkt	210 Pkt	73 Pcnt
1750190151	13.58 Volt	980 Pkt	210 Pkt	74 Pcnt
1750189258	13.58 Volt	970 Pkt	220 Pkt	72 Pcnt
1750188351	13.58 Volt	940 Pkt	210 Pkt	72 Pcnt
1750186549	13.58 Volt	920 Pkt	200 Pkt	71 Pcnt
1750185646	13.58 Volt	940 Pkt	200 Pkt	71 Pcnt
1750184751	13.58 Volt	940 Pkt	200 Pkt	71 Pcnt
1750183840	13.42 Volt	930 Pkt	200 Pkt	70 Pcnt
1750182957	13.42 Volt	930 Pkt	210 Pkt	70 Pcnt
1750182047	13.58 Volt	930 Pkt	210 Pkt	70 Pcnt
1750181140	13.42 Volt	920 Pkt	210 Pkt	68 Pcnt
1750180244	13.58 Volt	900 Pkt	200 Pkt	67 Pcnt
1750179344	13.58 Volt	900 Pkt	190 Pkt	66 Pcnt
1750178441	13.58 Volt	870 Pkt	180 Pkt	64 Pcnt
1750177539	13.58 Volt	920 Pkt	190 Pkt	66 Pcnt
1750176637	13.58 Volt	970 Pkt	220 Pkt	66 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.07715, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)