This is the latest recevied telemetry packets stored in our database for station/object W4KEL-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1790646449 | 12.86 | 26.61 | 0 | 0 | 0 |
| 1790644649 | 12.86 | 27.1 | 0 | 0 | 0 |
| 1790642848 | 12.86 | 27.59 | 0 | 0 | 0 |
| 1790639248 | 12.86 | 28.07 | 0 | 0 | 0 |
| 1790637447 | 12.86 | 28.56 | 0 | 0 | 0 |
| 1790635647 | 12.86 | 29.05 | 0 | 0 | 0 |
| 1790633847 | 12.83 | 29.54 | 0 | 0 | 0 |
| 1790632046 | 12.83 | 30.03 | 0 | 0 | 0 |
| 1790630246 | 12.83 | 30.52 | 0 | 0 | 0 |
| 1790623044 | 12.83 | 30.03 | 0 | 0 | 0 |
| 1790621243 | 12.8 | 30.03 | 0 | 0 | 0 |
| 1790619443 | 12.83 | 29.05 | 0 | 0 | 0 |
| 1790617643 | 12.8 | 28.56 | 0 | 0 | 0 |
| 1790615843 | 12.83 | 27.59 | 0 | 0 | 0 |
| 1790614041 | 12.8 | 26.61 | 0 | 0 | 0 |
| 1790612242 | 12.83 | 26.12 | 0 | 0 | 0 |
| 1790610442 | 12.8 | 25.63 | 0 | 0 | 0 |
| 1790608643 | 12.83 | 24.65 | 0 | 0 | 0 |
| 1790606845 | 12.83 | 23.67 | 0 | 0 | 0 |
| 1790605046 | 12.83 | 22.7 | 0 | 0 | 0 |
| 1790603247 | 12.83 | 21.72 | 0 | 0 | 0 |
| 1790601449 | 12.83 | 20.74 | 0 | 0 | 0 |
| 1790599650 | 12.83 | 20.25 | 0 | 0 | 0 |
| 1790597851 | 12.83 | 19.27 | 0 | 0 | 0 |
| 1790596053 | 12.83 | 19.27 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 0.0293, 0
Value2: 0, 0.489, -273.15
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)