APRS Track Direct

My position About ☰

reset

SQ3KT-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SQ3KT-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TX*	RX*	Digi*	V_Bat*
1778007316	603 Count	17 Count	17 Count	4.19 VDC
1778006415	602 Count	17 Count	17 Count	4.19 VDC
1778005514	601 Count	17 Count	17 Count	4.28 VDC
1778004614	600 Count	17 Count	17 Count	4.23 VDC
1778003744	599 Count	17 Count	17 Count	4.24 VDC
1778002843	598 Count	17 Count	17 Count	4.24 VDC
1778001942	597 Count	17 Count	17 Count	4.24 VDC
1778001042	596 Count	17 Count	17 Count	4.26 VDC
1778000141	595 Count	17 Count	17 Count	4.21 VDC
1777999240	594 Count	17 Count	17 Count	4.25 VDC
1777998340	593 Count	17 Count	17 Count	4.27 VDC
1777997439	592 Count	17 Count	17 Count	4.26 VDC
1777996539	591 Count	17 Count	17 Count	4.23 VDC
1777995638	590 Count	17 Count	17 Count	4.18 VDC
1777994737	589 Count	17 Count	17 Count	4.22 VDC
1777993836	588 Count	17 Count	17 Count	4.19 VDC
1777992936	587 Count	17 Count	17 Count	4.26 VDC
1777992035	586 Count	17 Count	17 Count	4.24 VDC
1777991134	585 Count	17 Count	17 Count	4.2 VDC
1777990233	584 Count	17 Count	17 Count	4.22 VDC
1777989333	583 Count	17 Count	17 Count	4.28 VDC
1777988431	582 Count	17 Count	17 Count	4.24 VDC
1777987530	581 Count	17 Count	17 Count	4.23 VDC
1777986630	580 Count	17 Count	17 Count	4.25 VDC
1777985729	579 Count	17 Count	17 Count	4.24 VDC

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)