This is the latest recevied telemetry packets stored in our database for station/object SP1HSP-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1790635518 | 171 Count | 133 Count | 133 Count | 4.14 VDC | 0.14 VDC |
| 1790633715 | 168 Count | 131 Count | 131 Count | 4.14 VDC | 0.14 VDC |
| 1790631912 | 165 Count | 129 Count | 129 Count | 4.14 VDC | 0.14 VDC |
| 1790630144 | 162 Count | 127 Count | 127 Count | 4.14 VDC | 0.14 VDC |
| 1790628342 | 159 Count | 125 Count | 125 Count | 4.14 VDC | 0.14 VDC |
| 1790626539 | 156 Count | 123 Count | 123 Count | 4.14 VDC | 0.14 VDC |
| 1790624736 | 150 Count | 118 Count | 118 Count | 4.14 VDC | 0.14 VDC |
| 1790622933 | 145 Count | 114 Count | 114 Count | 4.14 VDC | 0.14 VDC |
| 1790621130 | 142 Count | 112 Count | 112 Count | 4.14 VDC | 0.14 VDC |
| 1790619327 | 138 Count | 109 Count | 109 Count | 4.14 VDC | 0.14 VDC |
| 1790617524 | 129 Count | 101 Count | 101 Count | 4.14 VDC | 0.14 VDC |
| 1790615721 | 121 Count | 94 Count | 94 Count | 4.14 VDC | 0.14 VDC |
| 1790613918 | 117 Count | 91 Count | 91 Count | 4.14 VDC | 0.14 VDC |
| 1790612115 | 114 Count | 89 Count | 89 Count | 4.14 VDC | 0.14 VDC |
| 1790610312 | 111 Count | 87 Count | 87 Count | 4.14 VDC | 0.14 VDC |
| 1790608543 | 108 Count | 85 Count | 85 Count | 4.14 VDC | 0.14 VDC |
| 1790606740 | 105 Count | 83 Count | 83 Count | 4.14 VDC | 0.14 VDC |
| 1790604937 | 98 Count | 77 Count | 77 Count | 4.14 VDC | 0.14 VDC |
| 1790603134 | 95 Count | 75 Count | 75 Count | 4.14 VDC | 0.14 VDC |
| 1790601331 | 92 Count | 73 Count | 73 Count | 4.14 VDC | 0.14 VDC |
| 1790599527 | 88 Count | 70 Count | 70 Count | 4.14 VDC | 0.14 VDC |
| 1790597724 | 83 Count | 66 Count | 66 Count | 4.15 VDC | 0.14 VDC |
| 1790595921 | 80 Count | 64 Count | 64 Count | 4.15 VDC | 0.14 VDC |
| 1790590512 | 52 Count | 39 Count | 39 Count | 4.17 VDC | 0.14 VDC |
| 1790588710 | 49 Count | 37 Count | 37 Count | 4.17 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)