APRS Track Direct

My position About ☰

reset

SP7QPD-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SP7QPD-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Indoor temperature*	Indoor humidity*	Uz12*
1745050972	16 [oC]	67 [%]	12.2 [V]
1745050372	16 [oC]	67 [%]	12.33 [V]
1745049774	16 [oC]	67 [%]	12.33 [V]
1745049172	16 [oC]	67 [%]	12.09 [V]
1745048572	16 [oC]	67 [%]	12.01 [V]
1745047973	16 [oC]	67 [%]	12.33 [V]
1745047372	16 [oC]	67 [%]	12.25 [V]
1745046772	16 [oC]	67 [%]	11.93 [V]
1745046173	16 [oC]	67 [%]	12.06 [V]
1745045572	16 [oC]	67 [%]	12.38 [V]
1745044972	16 [oC]	67 [%]	12.41 [V]
1745044372	16 [oC]	67 [%]	12.01 [V]
1745043771	16 [oC]	67 [%]	12.25 [V]
1745043171	16 [oC]	67 [%]	12.38 [V]
1745042572	16 [oC]	67 [%]	12.2 [V]
1745041971	16 [oC]	67 [%]	12.04 [V]
1745041371	16 [oC]	67 [%]	12.57 [V]
1745040772	16 [oC]	67 [%]	12.25 [V]
1745040171	16 [oC]	67 [%]	12.17 [V]
1745039571	16 [oC]	67 [%]	12.2 [V]
1745038971	16 [oC]	67 [%]	12.43 [V]
1745038371	16 [oC]	67 [%]	12.3 [V]
1745037771	16 [oC]	67 [%]	12.04 [V]
1745037171	16 [oC]	67 [%]	12.3 [V]
1745036570	16 [oC]	67 [%]	12.46 [V]

*Used Equation Coefficients:

Indoor temperature: 0, 0.1, 0

Indoor humidity: 0, 1, 0

Uz12: 0, 0.0264, 0

none1: 0, 1, 0

none2: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)