APRS Track Direct

My position About ☰

reset

IR3ZWY-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IR3ZWY-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Rx1h*	Dg10m*	DgR*	Eff*
1836274610	216 Pkt	1480 Pkt	0 Pkt	0.38 Pcnt	63 Pcnt
1836274460	207 Pkt	1450 Pkt	2 Pkt	0.38 Pcnt	63 Pcnt
1836274310	201 Pkt	1490 Pkt	0 Pkt	0.38 Pcnt	63 Pcnt
1836274160	206 Pkt	1460 Pkt	1 Pkt	0.38 Pcnt	63 Pcnt
1836274009	223 Pkt	1520 Pkt	1 Pkt	0.38 Pcnt	63 Pcnt
1770096406	253 Pkt	1550 Pkt	1 Pkt	0.37 Pcnt	63 Pcnt
1770096106	242 Pkt	1560 Pkt	1 Pkt	0.37 Pcnt	63 Pcnt
1770095806	248 Pkt	1560 Pkt	1 Pkt	0.37 Pcnt	63 Pcnt
1770095505	249 Pkt	1540 Pkt	2 Pkt	0.37 Pcnt	63 Pcnt
1770095205	228 Pkt	1540 Pkt	1 Pkt	0.37 Pcnt	63 Pcnt
1770094905	212 Pkt	1540 Pkt	0 Pkt	0.37 Pcnt	63 Pcnt
1770094604	207 Pkt	1540 Pkt	1 Pkt	0.37 Pcnt	63 Pcnt
1770094304	231 Pkt	1550 Pkt	1 Pkt	0.37 Pcnt	63 Pcnt
1770094004	243 Pkt	1550 Pkt	1 Pkt	0.37 Pcnt	63 Pcnt
1770093704	235 Pkt	1530 Pkt	1 Pkt	0.37 Pcnt	63 Pcnt
1770093403	235 Pkt	1540 Pkt	1 Pkt	0.37 Pcnt	63 Pcnt
1770093103	271 Pkt	1570 Pkt	1 Pkt	0.37 Pcnt	63 Pcnt
1770092803	262 Pkt	1550 Pkt	2 Pkt	0.37 Pcnt	63 Pcnt
1770092502	225 Pkt	1530 Pkt	1 Pkt	0.37 Pcnt	63 Pcnt
1770092202	232 Pkt	1540 Pkt	1 Pkt	0.37 Pcnt	63 Pcnt
1770091902	247 Pkt	1560 Pkt	1 Pkt	0.37 Pcnt	63 Pcnt
1770091602	233 Pkt	1570 Pkt	0 Pkt	0.37 Pcnt	63 Pcnt
1770091301	216 Pkt	1580 Pkt	0 Pkt	0.37 Pcnt	63 Pcnt
1770091001	224 Pkt	1590 Pkt	1 Pkt	0.37 Pcnt	63 Pcnt
1770090701	211 Pkt	1600 Pkt	1 Pkt	0.37 Pcnt	63 Pcnt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

DgR: 0, 0.001, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)