APRS Track Direct

My position About ☰

reset

9A3DZK-9 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9A3DZK-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Vin*	Temp*	A3*	A4*	A5*
1782483400	12 Volt	0 °C	0 None	0 None	0 None
1782483100	12 Volt	0 °C	0 None	0 None	0 None
1782482800	12 Volt	0 °C	0 None	0 None	0 None
1782482501	12 Volt	0 °C	0 None	0 None	0 None
1782482200	12 Volt	0 °C	0 None	0 None	0 None
1782481902	12 Volt	0 °C	0 None	0 None	0 None
1782481601	11.93 Volt	0 °C	0 None	0 None	0 None
1782481003	12.08 Volt	0 °C	0 None	0 None	0 None
1782480702	12.08 Volt	0 °C	0 None	0 None	0 None
1782480402	12.08 Volt	0 °C	0 None	0 None	0 None
1782480102	12 Volt	0 °C	0 None	0 None	0 None
1782479802	13.73 Volt	0 °C	0 None	0 None	0 None
1782479502	13.13 Volt	0 °C	0 None	0 None	0 None
1782478900	12.98 Volt	0 °C	0 None	0 None	0 None
1782478602	13.13 Volt	0 °C	0 None	0 None	0 None
1782478302	13.13 Volt	0 °C	0 None	0 None	0 None
1782476502	13.73 Volt	0 °C	0 None	0 None	0 None
1782476202	13.73 Volt	0 °C	0 None	0 None	0 None
1782475902	12.3 Volt	0 °C	0 None	0 None	0 None
1782475602	12.3 Volt	0 °C	0 None	0 None	0 None
1782475302	12.53 Volt	0 °C	0 None	0 None	0 None
1782475002	13.2 Volt	0 °C	0 None	0 None	0 None
1782474702	12.6 Volt	0 °C	0 None	0 None	0 None
1782473510	12.08 Volt	0 °C	0 None	0 None	0 None
1782473210	12.08 Volt	0 °C	0 None	0 None	0 None

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Temp: 0, 0, 0

A3: 0, 0, 0

A4: 0, 0, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)