This is the latest recevied telemetry packets stored in our database for station/object IK8SUT-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RXPKT* | DIGIPKT* | DECPKT* | VOLTPK* | AMPPK* |
|---|---|---|---|---|---|
| 1786726377 | 0 | 0 | 0 | 0 | 0 |
| 1786725777 | 0 | 0 | 0 | 0 | 0 |
| 1786725177 | 0 | 0 | 0 | 0 | 0 |
| 1786724577 | 0 | 0 | 0 | 0 | 0 |
| 1786723977 | 0 | 0 | 0 | 0 | 0 |
| 1786723377 | 0 | 0 | 0 | 0 | 0 |
| 1786722777 | 0 | 0 | 0 | 0 | 0 |
| 1786722177 | 0 | 0 | 0 | 0 | 0 |
| 1786721577 | 0 | 0 | 0 | 0 | 0 |
| 1786720977 | 0 | 0 | 0 | 0 | 0 |
| 1786720377 | 0 | 0 | 0 | 0 | 0 |
| 1786719777 | 0 | 0 | 0 | 0 | 0 |
| 1786719177 | 0 | 0 | 0 | 0 | 0 |
| 1786718577 | 0 | 0 | 0 | 0 | 0 |
| 1786717977 | 0 | 0 | 0 | 0 | 0 |
| 1786717377 | 0 | 0 | 0 | 0 | 0 |
| 1786716777 | 0 | 0 | 0 | 0 | 0 |
| 1786716177 | 0 | 0 | 0 | 0 | 0 |
| 1786715577 | 0 | 0 | 0 | 0 | 0 |
| 1786714977 | 0 | 0 | 0 | 0 | 0 |
| 1786714377 | 0 | 0 | 0 | 0 | 0 |
| 1786713777 | 0 | 0 | 0 | 0 | 0 |
| 1786713177 | 0 | 0 | 0 | 0 | 0 |
| 1786712577 | 0 | 0 | 0 | 0 | 0 |
| 1786711978 | 0 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
RXPKT: 0, 0, 0
DIGIPKT: 0, 0, 0
DECPKT: 0, 0, 0
VOLTPK: 0, 0, 0
AMPPK: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)