This is the latest recevied telemetry packets stored in our database for station/object E79VTR-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1794906347 | 44.15 V | -0.01 V | -29 A | 0 mA | 4.2 C |
| 1794905135 | 44.24 V | -0.01 V | -29 A | 0 mA | 4.2 C |
| 1794903934 | 44.43 V | -0.01 V | -29 A | 0 mA | 4.2 C |
| 1794902713 | 44.15 V | -0.01 V | -29 A | 0 mA | 4.2 C |
| 1794901489 | 44.15 V | -0.01 V | -29 A | 0 mA | 4.2 C |
| 1794900269 | 44.24 V | -0.01 V | -29 A | 0 mA | 4.2 C |
| 1794899045 | 43.86 V | -0.01 V | -29 A | 0 mA | 4.2 C |
| 1794897827 | 44.15 V | -0.01 V | -29 A | 0 mA | 4.2 C |
| 1794896609 | 44.24 V | -0.01 V | -29 A | 0 mA | 4.2 C |
| 1794895386 | 44.15 V | -0.01 V | -29 A | 0 mA | 4.2 C |
| 1794894172 | 44.34 V | -0.01 V | -29 A | 0 mA | 4.2 C |
| 1794892954 | 44.43 V | -0.01 V | -29 A | 0 mA | 4.2 C |
| 1794891740 | 44.34 V | -0.01 V | -29 A | 0 mA | 4.2 C |
| 1794890525 | 44.15 V | -0.01 V | -29 A | 0 mA | 4.2 C |
| 1794889311 | 44.34 V | -0.01 V | -29 A | 0 mA | 4.2 C |
| 1794888091 | 44.24 V | -0.01 V | -29 A | 0 mA | 4.2 C |
| 1794886873 | 44.24 V | -0.01 V | -29 A | 0 mA | 4.2 C |
| 1794885655 | 44.15 V | -0.01 V | -29 A | 0 mA | 4.2 C |
| 1794884432 | 44.15 V | -0.01 V | -29 A | 0 mA | 4.2 C |
| 1794883217 | 44.24 V | -0.01 V | -29 A | 0 mA | 4.2 C |
| 1794882005 | 44.24 V | -0.01 V | -29 A | 0 mA | 4.2 C |
| 1794880788 | 44.34 V | -0.01 V | -29 A | 0 mA | 4.2 C |
| 1794879573 | 44.24 V | -0.01 V | -29 A | 0 mA | 4.2 C |
| 1794878352 | 44.24 V | -0.01 V | -29 A | 0 mA | 4.2 C |
| 1794877135 | 44.15 V | -0.01 V | -29 A | 0 mA | 4.2 C |
*Used Equation Coefficients:
Value1: 5e-06, 0.089986, -0.00971
Value2: 5e-06, 0.089986, -0.00971
Value3: -0.00017, 0.24783, -29.0028
Value4: 0, 19.5, 0
Value5: 0.000638, 0.002726, 4.1985
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)