This is the latest recevied telemetry packets stored in our database for station/object DL4ALL-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Press* | Temp.in* | Hum* | eGAS* | Temp.out* |
|---|---|---|---|---|---|
| 1758197302 | 975.3 hPa | 25 C deg | 48.9 % | 425 - | 0 C deg |
| 1758195502 | 975.3 hPa | 24.6 C deg | 48.4 % | 440 - | 0 C deg |
| 1758193701 | 975.3 hPa | 24.3 C deg | 48.6 % | 452 - | 0 C deg |
| 1758191901 | 975.4 hPa | 24.1 C deg | 48.6 % | 447 - | 0 C deg |
| 1758190101 | 975.5 hPa | 23.8 C deg | 48.2 % | 440 - | 0 C deg |
| 1758188301 | 975.4 hPa | 23.8 C deg | 48.1 % | 424 - | 0 C deg |
| 1758186501 | 975.2 hPa | 23.8 C deg | 48 % | 410 - | 0 C deg |
| 1758184701 | 975.1 hPa | 23.7 C deg | 46.8 % | 401 - | 0 C deg |
| 1758182901 | 975.2 hPa | 23.7 C deg | 46.8 % | 376 - | 0 C deg |
| 1758181101 | 974.9 hPa | 23.7 C deg | 46.5 % | 360 - | 0 C deg |
| 1758179300 | 974.9 hPa | 23.7 C deg | 46.1 % | 355 - | 0 C deg |
| 1758177500 | 974.8 hPa | 23.8 C deg | 46 % | 347 - | 0 C deg |
| 1758175703 | 974.5 hPa | 23.8 C deg | 45.9 % | 337 - | 0 C deg |
| 1758173900 | 974.3 hPa | 23.9 C deg | 45.9 % | 326 - | 0 C deg |
| 1758172100 | 974.1 hPa | 23.9 C deg | 45.8 % | 319 - | 0 C deg |
| 1758137895 | 973.9 hPa | 24.5 C deg | 45.2 % | 416 - | 0 C deg |
| 1758136095 | 974.1 hPa | 24.3 C deg | 45.3 % | 417 - | 0 C deg |
| 1758134295 | 974 hPa | 24.2 C deg | 45.4 % | 413 - | 0 C deg |
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
eGAS: 0, 1, 0
Temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)