APRS Track Direct

My position About ☰

reset

IZ4VVL Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IZ4VVL. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Rx1h*	Dg10m*	DgR*	Eff*
1782507739	109 Pkt	510 Pkt	3 Pkt	0.21 Pcnt	78 Pcnt
1782507439	72 Pkt	480 Pkt	3 Pkt	0.21 Pcnt	78 Pcnt
1782507139	79 Pkt	470 Pkt	0 Pkt	0.21 Pcnt	78 Pcnt
1782506839	93 Pkt	470 Pkt	0 Pkt	0.21 Pcnt	78 Pcnt
1782506539	67 Pkt	450 Pkt	0 Pkt	0.21 Pcnt	78 Pcnt
1782506239	62 Pkt	450 Pkt	0 Pkt	0.21 Pcnt	78 Pcnt
1782505939	72 Pkt	450 Pkt	0 Pkt	0.21 Pcnt	78 Pcnt
1782505638	80 Pkt	440 Pkt	0 Pkt	0.21 Pcnt	78 Pcnt
1782505339	83 Pkt	460 Pkt	0 Pkt	0.21 Pcnt	78 Pcnt
1782505039	61 Pkt	450 Pkt	0 Pkt	0.21 Pcnt	78 Pcnt
1782504739	62 Pkt	450 Pkt	0 Pkt	0.21 Pcnt	78 Pcnt
1782504439	76 Pkt	460 Pkt	0 Pkt	0.21 Pcnt	78 Pcnt
1782504139	72 Pkt	460 Pkt	0 Pkt	0.21 Pcnt	78 Pcnt
1782503839	51 Pkt	450 Pkt	0 Pkt	0.21 Pcnt	78 Pcnt
1782503539	66 Pkt	460 Pkt	0 Pkt	0.21 Pcnt	78 Pcnt
1782503239	77 Pkt	460 Pkt	0 Pkt	0.21 Pcnt	78 Pcnt
1782502939	57 Pkt	460 Pkt	0 Pkt	0.21 Pcnt	78 Pcnt
1782502639	49 Pkt	460 Pkt	0 Pkt	0.21 Pcnt	78 Pcnt
1782502339	83 Pkt	470 Pkt	0 Pkt	0.21 Pcnt	78 Pcnt
1782502039	88 Pkt	480 Pkt	0 Pkt	0.21 Pcnt	78 Pcnt
1782501739	79 Pkt	470 Pkt	0 Pkt	0.21 Pcnt	78 Pcnt
1782501439	72 Pkt	460 Pkt	0 Pkt	0.21 Pcnt	78 Pcnt
1782501139	71 Pkt	460 Pkt	0 Pkt	0.21 Pcnt	78 Pcnt
1782500839	73 Pkt	470 Pkt	0 Pkt	0.21 Pcnt	78 Pcnt
1782500539	71 Pkt	470 Pkt	0 Pkt	0.21 Pcnt	78 Pcnt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

DgR: 0, 0.001, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)