This is the latest recevied telemetry packets stored in our database for station/object OE6ATD-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Press* | Temp.in* | Hum* | eGAS* | Temp.out* |
|---|---|---|---|---|---|
| 1786720314 | 988.2 hPa | 31.8 C deg | 27.1 % | 124 - | 0 C deg |
| 1786718489 | 988.5 hPa | 31.5 C deg | 27.8 % | 121 - | 0 C deg |
| 1786716658 | 988.7 hPa | 31 C deg | 28 % | 128 - | 0 C deg |
| 1786714824 | 988.9 hPa | 30.9 C deg | 29.2 % | 119 - | 0 C deg |
| 1786712992 | 989.2 hPa | 30 C deg | 30 % | 129 - | 0 C deg |
| 1786711165 | 989.5 hPa | 29.8 C deg | 29 % | 133 - | 0 C deg |
| 1786709335 | 989.9 hPa | 29 C deg | 29.6 % | 130 - | 0 C deg |
| 1786707502 | 990.2 hPa | 28.8 C deg | 31.3 % | 96 - | 0 C deg |
| 1786705675 | 990.5 hPa | 28.4 C deg | 32.1 % | 109 - | 0 C deg |
| 1786703846 | 990.9 hPa | 27.7 C deg | 32.7 % | 117 - | 0 C deg |
| 1786702034 | 991.3 hPa | 27.1 C deg | 35.3 % | 116 - | 0 C deg |
| 1786700187 | 991.6 hPa | 26.3 C deg | 36.8 % | 116 - | 0 C deg |
| 1786698354 | 991.9 hPa | 25.8 C deg | 36.6 % | 98 - | 0 C deg |
| 1786696531 | 992 hPa | 24.8 C deg | 38 % | 64 - | 0 C deg |
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
eGAS: 0, 1, 0
Temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)