This is the latest recevied telemetry packets stored in our database for station/object AE6PS. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1750135507 | 152 | 168 | 1 | 0 | 6 |
| 1750135187 | 152 | 166 | 2 | 0 | 6 |
| 1750135134 | 152 | 169 | 1 | 0 | 5 |
| 1750134983 | 152 | 168 | 1 | 0 | 6 |
| 1750134935 | 152 | 169 | 2 | 0 | 6 |
| 1750134915 | 152 | 166 | 2 | 0 | 8 |
| 1750132749 | 152 | 167 | 1 | 0 | 5 |
| 1750132709 | 152 | 169 | 1 | 0 | 5 |
| 1750132688 | 152 | 167 | 1 | 0 | 5 |
| 1750132629 | 152 | 170 | 1 | 0 | 5 |
| 1750132605 | 152 | 166 | 1 | 0 | 5 |
| 1750132578 | 152 | 169 | 2 | 0 | 6 |
| 1750132559 | 153 | 169 | 1 | 0 | 8 |
| 1750131291 | 152 | 165 | 1 | 0 | 7 |
| 1750131259 | 152 | 165 | 2 | 0 | 5 |
| 1750131229 | 152 | 169 | 1 | 0 | 5 |
| 1750131214 | 152 | 168 | 1 | 0 | 6 |
| 1750131195 | 152 | 165 | 2 | 0 | 6 |
| 1750129710 | 153 | 168 | 250 | 0 | 6 |
| 1750129592 | 153 | 166 | 249 | 0 | 6 |
| 1750129505 | 153 | 168 | 250 | 0 | 5 |
| 1750129143 | 154 | 170 | 1 | 0 | 6 |
| 1750128979 | 154 | 167 | 2 | 0 | 7 |
| 1750121092 | 153 | 168 | 2 | 0 | 5 |
| 1750120930 | 154 | 167 | 2 | 0 | 5 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)