This is the latest recevied telemetry packets stored in our database for station/object STA3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | RxTraffic* | TxTraffic* | RxDrop* | RSSI* | SUN* |
---|---|---|---|---|---|
1754583222 | 0 Pkt | 0 Pkt | 0 Pkt | -66 dBm | 4 % |
1754582648 | 0 Pkt | 0 Pkt | 0 Pkt | -65 dBm | 4 % |
1754582274 | 0 Pkt | 0 Pkt | 0 Pkt | -65 dBm | 4 % |
1754581850 | 0 Pkt | 0 Pkt | 0 Pkt | -65 dBm | 4 % |
1754581473 | 0 Pkt | 0 Pkt | 0 Pkt | -66 dBm | 4 % |
1754581034 | 0 Pkt | 0 Pkt | 0 Pkt | -65 dBm | 4 % |
1754580625 | 0 Pkt | 0 Pkt | 0 Pkt | -66 dBm | 4 % |
1754580374 | 0 Pkt | 0 Pkt | 0 Pkt | -66 dBm | 4 % |
1754579923 | 0 Pkt | 0 Pkt | 0 Pkt | -65 dBm | 4 % |
1754579693 | 0 Pkt | 0 Pkt | 0 Pkt | -66 dBm | 4 % |
1754579693 | 0 Pkt | 0 Pkt | 0 Pkt | -67 dBm | 4 % |
1754579692 | 0 Pkt | 0 Pkt | 0 Pkt | -68 dBm | 4 % |
1754577804 | 0 Pkt | 0 Pkt | 0 Pkt | -71 dBm | 4 % |
1754577520 | 0 Pkt | 0 Pkt | 0 Pkt | -70 dBm | 4 % |
1754576997 | 0 Pkt | 0 Pkt | 0 Pkt | -64 dBm | 4 % |
1754576823 | 0 Pkt | 0 Pkt | 0 Pkt | -67 dBm | 4 % |
1754576272 | 0 Pkt | 0 Pkt | 0 Pkt | -66 dBm | 4 % |
1754575872 | 0 Pkt | 0 Pkt | 0 Pkt | -67 dBm | 4 % |
1754575395 | 0 Pkt | 0 Pkt | 0 Pkt | -69 dBm | 4 % |
1754574992 | 0 Pkt | 0 Pkt | 0 Pkt | -67 dBm | 4 % |
1754574786 | 0 Pkt | 0 Pkt | 0 Pkt | -70 dBm | 4 % |
1754574197 | 0 Pkt | 0 Pkt | 0 Pkt | -67 dBm | 4 % |
1754572202 | 0 Pkt | 0 Pkt | 0 Pkt | -65 dBm | 4 % |
1754571945 | 0 Pkt | 0 Pkt | 0 Pkt | -66 dBm | 4 % |
1754571446 | 0 Pkt | 0 Pkt | 0 Pkt | -66 dBm | 4 % |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
SUN: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)