APRS Track Direct

My position About ☰

reset

IR3EU-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IR3EU-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1762311362	0.16 Rx Erlang	0.01 Tx Erlang	136 count/10m	5 count/10m	8 count/10m
1762310162	0.15 Rx Erlang	0.01 Tx Erlang	118 count/10m	3 count/10m	6 count/10m
1762308962	0.08 Rx Erlang	0.01 Tx Erlang	69 count/10m	5 count/10m	6 count/10m
1762307762	0.09 Rx Erlang	0.01 Tx Erlang	75 count/10m	4 count/10m	5 count/10m
1762306562	0.08 Rx Erlang	0.01 Tx Erlang	72 count/10m	2 count/10m	7 count/10m
1762305362	0.08 Rx Erlang	0.01 Tx Erlang	62 count/10m	0 count/10m	8 count/10m
1762304162	0.14 Rx Erlang	0.01 Tx Erlang	122 count/10m	2 count/10m	5 count/10m
1762302962	0.15 Rx Erlang	0.01 Tx Erlang	128 count/10m	4 count/10m	6 count/10m
1762301762	0.11 Rx Erlang	0.01 Tx Erlang	94 count/10m	7 count/10m	7 count/10m
1762300562	0.18 Rx Erlang	0.01 Tx Erlang	153 count/10m	5 count/10m	6 count/10m
1762299362	0.17 Rx Erlang	0.01 Tx Erlang	163 count/10m	1 count/10m	8 count/10m
1762298162	0.14 Rx Erlang	0.01 Tx Erlang	132 count/10m	2 count/10m	5 count/10m
1762296962	0.17 Rx Erlang	0 Tx Erlang	154 count/10m	3 count/10m	3 count/10m
1762295762	0.17 Rx Erlang	0.01 Tx Erlang	157 count/10m	2 count/10m	7 count/10m
1762294562	0.16 Rx Erlang	0.01 Tx Erlang	142 count/10m	1 count/10m	6 count/10m
1762293362	0.15 Rx Erlang	0.01 Tx Erlang	142 count/10m	2 count/10m	10 count/10m
1762292162	0.15 Rx Erlang	0.01 Tx Erlang	143 count/10m	6 count/10m	6 count/10m
1762290962	0.15 Rx Erlang	0 Tx Erlang	136 count/10m	8 count/10m	4 count/10m
1762289762	0.13 Rx Erlang	0 Tx Erlang	115 count/10m	5 count/10m	3 count/10m
1762288562	0.15 Rx Erlang	0.01 Tx Erlang	135 count/10m	4 count/10m	6 count/10m
1762287362	0.14 Rx Erlang	0.01 Tx Erlang	128 count/10m	3 count/10m	4 count/10m
1762286162	0.18 Rx Erlang	0.01 Tx Erlang	164 count/10m	9 count/10m	6 count/10m
1762284962	0.2 Rx Erlang	0.01 Tx Erlang	169 count/10m	8 count/10m	8 count/10m
1762283762	0.18 Rx Erlang	0.01 Tx Erlang	177 count/10m	13 count/10m	5 count/10m
1762282562	0.17 Rx Erlang	0.01 Tx Erlang	161 count/10m	16 count/10m	6 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)