APRS Track Direct

My position About ☰

reset

PY3JRT-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object PY3JRT-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1790666440	0.04 Rx Erlang	0.02 Tx Erlang	21 count/10m	17 count/10m	11 count/10m
1790665240	0.04 Rx Erlang	0.02 Tx Erlang	18 count/10m	16 count/10m	10 count/10m
1790664040	0.03 Rx Erlang	0.01 Tx Erlang	22 count/10m	18 count/10m	10 count/10m
1790662840	0.05 Rx Erlang	0.02 Tx Erlang	25 count/10m	21 count/10m	13 count/10m
1790661640	0.02 Rx Erlang	0.01 Tx Erlang	16 count/10m	14 count/10m	6 count/10m
1790660440	0.03 Rx Erlang	0.01 Tx Erlang	20 count/10m	17 count/10m	9 count/10m
1790659240	0.04 Rx Erlang	0.01 Tx Erlang	21 count/10m	18 count/10m	10 count/10m
1790658040	0.03 Rx Erlang	0.01 Tx Erlang	18 count/10m	16 count/10m	7 count/10m
1790656840	0.03 Rx Erlang	0.01 Tx Erlang	20 count/10m	16 count/10m	8 count/10m
1790655640	0.03 Rx Erlang	0.01 Tx Erlang	20 count/10m	17 count/10m	10 count/10m
1790654440	0.03 Rx Erlang	0.02 Tx Erlang	18 count/10m	15 count/10m	10 count/10m
1790653240	0.03 Rx Erlang	0.02 Tx Erlang	20 count/10m	18 count/10m	11 count/10m
1790652040	0.03 Rx Erlang	0.02 Tx Erlang	21 count/10m	18 count/10m	11 count/10m
1790650840	0.03 Rx Erlang	0.02 Tx Erlang	20 count/10m	17 count/10m	10 count/10m
1790649640	0.12 Rx Erlang	0.06 Tx Erlang	80 count/10m	42 count/10m	38 count/10m
1790648440	0.15 Rx Erlang	0.07 Tx Erlang	102 count/10m	53 count/10m	48 count/10m
1790647240	0.15 Rx Erlang	0.06 Tx Erlang	137 count/10m	46 count/10m	52 count/10m
1790646040	0.1 Rx Erlang	0.04 Tx Erlang	104 count/10m	37 count/10m	44 count/10m
1790644840	0.07 Rx Erlang	0.03 Tx Erlang	88 count/10m	28 count/10m	41 count/10m
1790643640	0.11 Rx Erlang	0.04 Tx Erlang	123 count/10m	32 count/10m	49 count/10m
1790642440	0.1 Rx Erlang	0.04 Tx Erlang	101 count/10m	27 count/10m	45 count/10m
1790641240	0.08 Rx Erlang	0.05 Tx Erlang	83 count/10m	24 count/10m	44 count/10m
1790640040	0.07 Rx Erlang	0.04 Tx Erlang	66 count/10m	19 count/10m	36 count/10m
1790638840	0.08 Rx Erlang	0.04 Tx Erlang	77 count/10m	32 count/10m	42 count/10m
1790637640	0.07 Rx Erlang	0.04 Tx Erlang	39 count/10m	29 count/10m	22 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)