This is the latest recevied telemetry packets stored in our database for station/object SA3VCC-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | VBat* | Bat* | CpuTemp* | CpuHum* | Lux* |
|---|---|---|---|---|---|
| 1836274551 | 4.41 V | 100 % | 15.5 C | 68.4 % | 0 lx |
| 1836274041 | 4.41 V | 100 % | 15.5 C | 68.4 % | 0 lx |
| 1766209496 | 3.88 V | 73 % | 5.9 C | 83.3 % | 0 lx |
| 1766208236 | 3.88 V | 74 % | 6 C | 83.2 % | 0 lx |
| 1766206975 | 3.88 V | 74 % | 5.7 C | 83.4 % | 0 lx |
| 1766205715 | 3.88 V | 74 % | 5.7 C | 83.1 % | 0 lx |
| 1766203195 | 3.88 V | 73 % | 5.5 C | 83 % | 0 lx |
| 1766201935 | 3.89 V | 74 % | 5.3 C | 83 % | 0 lx |
| 1766200675 | 3.89 V | 74 % | 5.1 C | 83.1 % | 0 lx |
| 1766198155 | 3.88 V | 73 % | 4 C | 83.7 % | 0 lx |
| 1766196895 | 3.88 V | 74 % | 4 C | 83.3 % | 0 lx |
| 1766195635 | 3.88 V | 74 % | 4 C | 83.4 % | 0 lx |
| 1766194375 | 3.88 V | 74 % | 4.2 C | 82.7 % | 0 lx |
| 1766193115 | 3.89 V | 74 % | 4.1 C | 82.9 % | 0 lx |
| 1766191855 | 3.89 V | 74 % | 3.2 C | 83.7 % | 0 lx |
| 1766190595 | 3.88 V | 74 % | 2.8 C | 83.2 % | 0 lx |
| 1766189335 | 3.89 V | 74 % | 3 C | 83.5 % | 0 lx |
| 1766188075 | 3.89 V | 74 % | 2.8 C | 83.5 % | 0 lx |
| 1766185555 | 3.89 V | 74 % | 2.8 C | 83.7 % | 0 lx |
| 1766184295 | 3.89 V | 74 % | 3.2 C | 83.6 % | 0 lx |
| 1766183035 | 3.88 V | 74 % | 3.4 C | 83.6 % | 0 lx |
| 1766181775 | 3.89 V | 74 % | 3.6 C | 83.6 % | 0 lx |
| 1766180515 | 3.89 V | 74 % | 3.4 C | 83.7 % | 0 lx |
| 1766177995 | 3.89 V | 74 % | 3.6 C | 83.5 % | 0 lx |
| 1766176735 | 3.89 V | 74 % | 3.6 C | 83.8 % | 0 lx |
*Used Equation Coefficients:
VBat: 0, 0.01, 2.5
Bat: 0, 1, 0
CpuTemp: 0, 0.1, 0
CpuHum: 0, 0.1, 0
Lux: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)