This is the latest recevied telemetry packets stored in our database for station/object S55UJE-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Uacu* | Iacu* | Temp* | Rx1h* | WIND* |
|---|---|---|---|---|---|
| 1794907489 | 12.6 Volt | -0.39 A | 0 C | 240 Pkt | 0 m/s |
| 1794907488 | 12.6 Volt | -0.39 A | 0 C | 240 Pkt | 0 m/s |
| 1794907188 | 12.6 Volt | -0.39 A | 0 C | 250 Pkt | 0 m/s |
| 1794907188 | 12.6 Volt | -0.39 A | 0 C | 250 Pkt | 0 m/s |
| 1794906888 | 12.6 Volt | -0.39 A | 0 C | 250 Pkt | 0 m/s |
| 1794906887 | 12.6 Volt | -0.39 A | 0 C | 250 Pkt | 0 m/s |
| 1794906588 | 12.6 Volt | -0.39 A | 0 C | 240 Pkt | 0 m/s |
| 1794906587 | 12.6 Volt | -0.39 A | 0 C | 240 Pkt | 0 m/s |
| 1794906287 | 12.6 Volt | 0.39 A | 0 C | 230 Pkt | 0 m/s |
| 1794906287 | 12.6 Volt | 0.39 A | 0 C | 230 Pkt | 0 m/s |
| 1794905987 | 12.6 Volt | 0 A | 0 C | 230 Pkt | 0 m/s |
| 1794905987 | 12.6 Volt | 0 A | 0 C | 230 Pkt | 0 m/s |
| 1794905687 | 12.6 Volt | 0 A | -0.5 C | 230 Pkt | 0 m/s |
| 1794905686 | 12.6 Volt | 0 A | -0.5 C | 230 Pkt | 0 m/s |
| 1794905387 | 12.5 Volt | -0.39 A | -0.5 C | 230 Pkt | 0 m/s |
| 1794905386 | 12.5 Volt | -0.39 A | -0.5 C | 230 Pkt | 0 m/s |
| 1794905086 | 12.5 Volt | -0.78 A | -0.5 C | 220 Pkt | 0 m/s |
| 1794905086 | 12.5 Volt | -0.78 A | -0.5 C | 220 Pkt | 0 m/s |
| 1794904787 | 12.5 Volt | -1.17 A | -0.5 C | 230 Pkt | 0 m/s |
| 1794904785 | 12.5 Volt | -1.17 A | -0.5 C | 230 Pkt | 0 m/s |
| 1794904486 | 12.5 Volt | -0.39 A | -0.5 C | 230 Pkt | 0 m/s |
| 1794904485 | 12.5 Volt | -0.39 A | -0.5 C | 230 Pkt | 0 m/s |
| 1794904185 | 12.5 Volt | -0.39 A | -0.5 C | 220 Pkt | 0 m/s |
| 1794904185 | 12.5 Volt | -0.39 A | -0.5 C | 220 Pkt | 0 m/s |
| 1794903939 | 12.5 Volt | -0.78 A | -0.5 C | 220 Pkt | 0 m/s |
*Used Equation Coefficients:
Uacu: 0, 0.100819, 0
Iacu: 0, 0.3917, -49.7457
Temp: 0, 0.5, -64
Rx1h: 0, 10, 0
WIND: 0, 0.1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)