APRS Track Direct

My position About ☰

reset

IR3EO-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IR3EO-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Rx1h*	Volt*	Temp. *
1836274627	247 Pkt	1470 Pkt	11.93 Volt	12.8 Celsiu
1836274477	222 Pkt	1450 Pkt	11.93 Volt	12.8 Celsiu
1836274327	224 Pkt	1490 Pkt	11.93 Volt	12.8 Celsiu
1836274177	213 Pkt	1460 Pkt	11.93 Volt	12.8 Celsiu
1836274027	231 Pkt	1500 Pkt	11.93 Volt	12.8 Celsiu
1770106872	88 Pkt	410 Pkt	11.69 Volt	12.8 Celsiu
1770106572	106 Pkt	390 Pkt	12.01 Volt	12.8 Celsiu
1770106272	103 Pkt	380 Pkt	12.01 Volt	12.8 Celsiu
1770105972	81 Pkt	370 Pkt	12.01 Volt	12.8 Celsiu
1770105672	59 Pkt	360 Pkt	12.01 Volt	12.8 Celsiu
1770105372	44 Pkt	370 Pkt	12.01 Volt	12.8 Celsiu
1770105072	38 Pkt	370 Pkt	12.01 Volt	12.8 Celsiu
1770104772	47 Pkt	380 Pkt	12.01 Volt	12.8 Celsiu
1770104472	37 Pkt	380 Pkt	12.01 Volt	12.8 Celsiu
1770104172	48 Pkt	420 Pkt	12.01 Volt	12.8 Celsiu
1770103873	57 Pkt	530 Pkt	12.01 Volt	12.8 Celsiu
1770103572	47 Pkt	580 Pkt	12.01 Volt	12.8 Celsiu
1770103272	70 Pkt	620 Pkt	12.01 Volt	12.8 Celsiu
1770102972	83 Pkt	650 Pkt	12.01 Volt	12.8 Celsiu
1770102673	90 Pkt	650 Pkt	12.01 Volt	12.8 Celsiu
1770102373	79 Pkt	680 Pkt	12.01 Volt	12.8 Celsiu
1770102073	64 Pkt	680 Pkt	12.01 Volt	12.8 Celsiu
1770101773	51 Pkt	680 Pkt	12.01 Volt	12.8 Celsiu
1770101473	49 Pkt	730 Pkt	12.01 Volt	12.8 Celsiu
1770101173	83 Pkt	780 Pkt	12.01 Volt	12.8 Celsiu

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Volt: 0, 0.079, 0

Temp. : 0, 0.1, 0

Eff1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)