APRS Track Direct

My position About ☰

reset

DB0SON-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DB0SON-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1739740179	13.95 Volt	630 Pkt	10 Pkt	83 Pcnt
1739739579	13.95 Volt	640 Pkt	10 Pkt	83 Pcnt
1739739579	13.95 Volt	640 Pkt	10 Pkt	83 Pcnt
1739738979	13.95 Volt	640 Pkt	10 Pkt	82 Pcnt
1739738379	13.95 Volt	630 Pkt	10 Pkt	82 Pcnt
1739737779	13.95 Volt	640 Pkt	10 Pkt	82 Pcnt
1739737779	13.95 Volt	640 Pkt	10 Pkt	82 Pcnt
1739737179	13.95 Volt	660 Pkt	10 Pkt	83 Pcnt
1739736579	13.95 Volt	660 Pkt	0 Pkt	82 Pcnt
1739735980	13.95 Volt	650 Pkt	0 Pkt	83 Pcnt
1739735979	13.95 Volt	650 Pkt	0 Pkt	83 Pcnt
1739735379	13.95 Volt	670 Pkt	0 Pkt	84 Pcnt
1739734779	13.95 Volt	670 Pkt	0 Pkt	84 Pcnt
1739734179	13.95 Volt	640 Pkt	10 Pkt	83 Pcnt
1739734179	13.95 Volt	640 Pkt	10 Pkt	83 Pcnt
1739733579	13.95 Volt	620 Pkt	0 Pkt	82 Pcnt
1739732979	13.95 Volt	600 Pkt	0 Pkt	82 Pcnt
1739732379	13.95 Volt	590 Pkt	0 Pkt	80 Pcnt
1739732379	13.95 Volt	590 Pkt	0 Pkt	80 Pcnt
1739731779	13.95 Volt	570 Pkt	0 Pkt	81 Pcnt
1739731179	13.95 Volt	560 Pkt	0 Pkt	81 Pcnt
1739730579	13.95 Volt	560 Pkt	0 Pkt	81 Pcnt
1739729979	13.95 Volt	560 Pkt	0 Pkt	80 Pcnt
1739729379	13.95 Volt	570 Pkt	0 Pkt	80 Pcnt
1739728780	13.95 Volt	570 Pkt	0 Pkt	80 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

DiRxT: 0, 10, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)