APRS Track Direct

My position About ☰

reset

VK4RBT-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK4RBT-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1732571684	14.14 Volt	210 Pkt	30 Pkt	69 Pcnt
1732570783	14.14 Volt	220 Pkt	30 Pkt	75 Pcnt
1732569882	14.14 Volt	200 Pkt	10 Pkt	76 Pcnt
1732568981	14.14 Volt	230 Pkt	10 Pkt	73 Pcnt
1732568080	14.14 Volt	250 Pkt	10 Pkt	73 Pcnt
1732567180	14.14 Volt	260 Pkt	10 Pkt	71 Pcnt
1732566279	14.14 Volt	270 Pkt	20 Pkt	71 Pcnt
1732565378	14.14 Volt	270 Pkt	20 Pkt	72 Pcnt
1732564477	14.14 Volt	300 Pkt	20 Pkt	71 Pcnt
1732563576	14.14 Volt	330 Pkt	10 Pkt	75 Pcnt
1732562675	14.14 Volt	320 Pkt	10 Pkt	75 Pcnt
1732561774	14.14 Volt	320 Pkt	10 Pkt	80 Pcnt
1732560873	14.14 Volt	300 Pkt	10 Pkt	81 Pcnt
1732559972	14.14 Volt	270 Pkt	10 Pkt	80 Pcnt
1732559072	14.14 Volt	270 Pkt	10 Pkt	83 Pcnt
1732558171	14.14 Volt	260 Pkt	10 Pkt	84 Pcnt
1732557270	14.14 Volt	250 Pkt	10 Pkt	83 Pcnt
1732556369	14.14 Volt	250 Pkt	10 Pkt	84 Pcnt
1732555468	14.14 Volt	250 Pkt	10 Pkt	83 Pcnt
1732554567	14.14 Volt	230 Pkt	10 Pkt	81 Pcnt
1732553666	14.14 Volt	230 Pkt	10 Pkt	82 Pcnt
1732552765	14.14 Volt	220 Pkt	10 Pkt	80 Pcnt
1732551864	14.14 Volt	210 Pkt	10 Pkt	81 Pcnt
1732550964	14.14 Volt	200 Pkt	10 Pkt	80 Pcnt
1732550063	14.14 Volt	190 Pkt	10 Pkt	81 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)