APRS Track Direct

My position About ☰

reset

WC4PEM-9 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object WC4PEM-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Temp*	Vin*	Dg1h*	Rx1h*	Eff1h*
1732421737	25.5 C	14.25 Volt	240 Pkt	810 Pkt	50 Pcnt
1732421736	25.5 C	14.25 Volt	240 Pkt	810 Pkt	50 Pcnt
1732421436	24 C	14.25 Volt	240 Pkt	820 Pkt	50 Pcnt
1732421136	22.5 C	14.25 Volt	240 Pkt	810 Pkt	49 Pcnt
1732421136	22.5 C	14.25 Volt	240 Pkt	810 Pkt	49 Pcnt
1732420837	20.5 C	14.25 Volt	250 Pkt	830 Pkt	49 Pcnt
1732420536	22 C	14.18 Volt	250 Pkt	810 Pkt	48 Pcnt
1732420236	23 C	14.25 Volt	250 Pkt	830 Pkt	49 Pcnt
1732419937	24.5 C	14.18 Volt	260 Pkt	840 Pkt	50 Pcnt
1732419936	24.5 C	14.18 Volt	260 Pkt	840 Pkt	50 Pcnt
1732419636	25.5 C	14.25 Volt	260 Pkt	860 Pkt	51 Pcnt
1732419336	24 C	14.18 Volt	260 Pkt	870 Pkt	52 Pcnt
1732419336	24 C	14.18 Volt	260 Pkt	870 Pkt	52 Pcnt
1732419036	23 C	14.25 Volt	270 Pkt	890 Pkt	52 Pcnt
1732418736	21 C	14.25 Volt	280 Pkt	920 Pkt	54 Pcnt
1732418736	21 C	14.25 Volt	280 Pkt	920 Pkt	54 Pcnt
1732418437	21 C	14.25 Volt	290 Pkt	930 Pkt	55 Pcnt
1732418137	22.5 C	14.18 Volt	300 Pkt	950 Pkt	57 Pcnt
1732418136	22.5 C	14.18 Volt	300 Pkt	950 Pkt	57 Pcnt
1732417837	23.5 C	14.25 Volt	300 Pkt	990 Pkt	59 Pcnt
1732417537	25.5 C	14.25 Volt	310 Pkt	1010 Pkt	61 Pcnt
1732417537	25.5 C	14.25 Volt	310 Pkt	1010 Pkt	61 Pcnt
1732417236	25 C	14.25 Volt	310 Pkt	1000 Pkt	62 Pcnt
1732416937	23.5 C	14.25 Volt	320 Pkt	1040 Pkt	63 Pcnt
1732416936	23.5 C	14.25 Volt	320 Pkt	1040 Pkt	63 Pcnt

*Used Equation Coefficients:

Temp: 0, 0.5, -64

Vin: 0, 0.075, 0

Dg1h: 0, 10, 0

Rx1h: 0, 10, 0

Eff1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)