This is the latest recevied telemetry packets stored in our database for station/object EA5SW-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1786735686 | 0 Count | 722 Count | 0 Count | 4.29 VDC | 0 VDC |
| 1786734186 | 0 Count | 677 Count | 0 Count | 4.22 VDC | 0 VDC |
| 1786732686 | 0 Count | 631 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1786731185 | 0 Count | 592 Count | 0 Count | 4.24 VDC | 0 VDC |
| 1786729685 | 0 Count | 569 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1786729086 | 0 Count | 547 Count | 0 Count | 4.24 VDC | 0 VDC |
| 1786727586 | 0 Count | 517 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1786726086 | 0 Count | 494 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1786724586 | 0 Count | 468 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1786723086 | 0 Count | 422 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1786721586 | 0 Count | 387 Count | 0 Count | 4.21 VDC | 0 VDC |
| 1786720085 | 0 Count | 348 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1786718585 | 0 Count | 322 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1786717085 | 0 Count | 277 Count | 0 Count | 4.29 VDC | 0 VDC |
| 1786715585 | 0 Count | 250 Count | 0 Count | 4.29 VDC | 0 VDC |
| 1786714087 | 0 Count | 214 Count | 0 Count | 4.33 VDC | 0 VDC |
| 1786712585 | 0 Count | 189 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1786711085 | 0 Count | 160 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1786709585 | 0 Count | 129 Count | 0 Count | 4.32 VDC | 0 VDC |
| 1786708085 | 0 Count | 90 Count | 0 Count | 4.35 VDC | 0 VDC |
| 1786707485 | 0 Count | 76 Count | 0 Count | 4.21 VDC | 0 VDC |
| 1786705985 | 0 Count | 46 Count | 0 Count | 4.24 VDC | 0 VDC |
| 1786704485 | 0 Count | 21 Count | 0 Count | 4.29 VDC | 0 VDC |
| 1786702985 | 0 Count | 1009 Count | 0 Count | 4.33 VDC | 0 VDC |
| 1786701485 | 0 Count | 982 Count | 0 Count | 4.21 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)