This is the latest recevied telemetry packets stored in our database for station/object EL-EA3HUL. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1792223966 | 0 | 22 | 0 | 3 | 0 |
| 1792223366 | 0 | 19 | 0 | 2 | 0 |
| 1792222766 | 0 | 52 | 0 | 3 | 0 |
| 1792222166 | 0 | 0 | 0 | 0 | 0 |
| 1792221566 | 0 | 101 | 0 | 7 | 0 |
| 1792220966 | 0 | 85 | 0 | 6 | 0 |
| 1792220366 | 0 | 0 | 0 | 0 | 0 |
| 1792219766 | 0 | 17 | 0 | 1 | 0 |
| 1792219166 | 0 | 30 | 0 | 1 | 0 |
| 1792218566 | 0 | 2 | 0 | 1 | 0 |
| 1792217966 | 0 | 25 | 0 | 3 | 0 |
| 1792217366 | 0 | 63 | 0 | 4 | 0 |
| 1792216766 | 0 | 0 | 0 | 0 | 0 |
| 1792216166 | 0 | 17 | 0 | 1 | 0 |
| 1792215566 | 0 | 30 | 0 | 1 | 0 |
| 1792214966 | 0 | 0 | 0 | 0 | 0 |
| 1792214366 | 0 | 17 | 0 | 1 | 0 |
| 1792213766 | 0 | 67 | 0 | 4 | 0 |
| 1792213166 | 0 | 0 | 0 | 0 | 0 |
| 1792212566 | 0 | 17 | 0 | 1 | 0 |
| 1792211966 | 0 | 52 | 0 | 4 | 0 |
| 1792211366 | 0 | 0 | 0 | 0 | 0 |
| 1792210766 | 0 | 26 | 0 | 4 | 0 |
| 1792210166 | 0 | 87 | 0 | 7 | 0 |
| 1792209566 | 0 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)