This is the latest recevied telemetry packets stored in our database for station/object ER-EA7EGJ. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1792231792 | 5 | 72 | 1 | 3 | 0 |
| 1792231192 | 0 | 285 | 0 | 11 | 0 |
| 1792230592 | 0 | 725 | 0 | 13 | 0 |
| 1792229992 | 0 | 168 | 0 | 9 | 0 |
| 1792229392 | 0 | 762 | 0 | 12 | 0 |
| 1792228792 | 0 | 451 | 0 | 10 | 0 |
| 1792228192 | 0 | 39 | 0 | 4 | 0 |
| 1792227592 | 0 | 377 | 0 | 13 | 0 |
| 1792226992 | 0 | 24 | 0 | 2 | 0 |
| 1792226392 | 0 | 13 | 0 | 1 | 0 |
| 1792225792 | 0 | 35 | 0 | 4 | 0 |
| 1792225192 | 0 | 31 | 0 | 5 | 0 |
| 1792224592 | 0 | 195 | 0 | 5 | 0 |
| 1792223992 | 0 | 797 | 0 | 11 | 0 |
| 1792223392 | 0 | 911 | 0 | 6 | 0 |
| 1792222792 | 0 | 939 | 0 | 9 | 0 |
| 1792222192 | 0 | 923 | 0 | 5 | 0 |
| 1792221592 | 0 | 900 | 0 | 7 | 0 |
| 1792220992 | 0 | 200 | 0 | 8 | 0 |
| 1792219767 | 0 | 661 | 0 | 11 | 0 |
| 1792219168 | 0 | 99 | 0 | 5 | 0 |
| 1792218567 | 0 | 48 | 0 | 4 | 0 |
| 1792217967 | 0 | 35 | 0 | 3 | 0 |
| 1792217368 | 0 | 113 | 0 | 7 | 0 |
| 1792216768 | 0 | 19 | 0 | 3 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)