APRS Track Direct

My position About ☰

reset

XE2OR-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object XE2OR-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Cpu*	Temp*	FreeM*	RxP*	TxP*
1778037832	0.33 Load	68.76 DegC	68 Mb	1 Pkt	0 Pkt
1778037529	0.34 Load	68.76 DegC	72 Mb	1 Pkt	2 Pkt
1778037232	0.34 Load	68.76 DegC	69 Mb	0 Pkt	0 Pkt
1778036928	0.31 Load	67.68 DegC	69 Mb	1 Pkt	0 Pkt
1778036629	0.34 Load	68.76 DegC	69 Mb	1 Pkt	2 Pkt
1778036328	0.25 Load	67.68 DegC	70 Mb	0 Pkt	0 Pkt
1778036032	0.34 Load	68.76 DegC	68 Mb	0 Pkt	0 Pkt
1778035728	0.39 Load	68.76 DegC	69 Mb	1 Pkt	2 Pkt
1778035432	0.36 Load	68.76 DegC	73 Mb	1 Pkt	0 Pkt
1778035128	0.36 Load	68.76 DegC	74 Mb	0 Pkt	0 Pkt
1778034829	0.31 Load	68.76 DegC	75 Mb	1 Pkt	2 Pkt
1778034529	0.3 Load	69.29 DegC	73 Mb	1 Pkt	0 Pkt
1778034232	0.28 Load	68.76 DegC	70 Mb	1 Pkt	0 Pkt
1778033929	0.35 Load	68.76 DegC	71 Mb	1 Pkt	2 Pkt
1778033632	0.4 Load	68.76 DegC	70 Mb	0 Pkt	0 Pkt
1778033329	0.45 Load	68.76 DegC	70 Mb	1 Pkt	0 Pkt
1778033028	0.43 Load	68.76 DegC	71 Mb	1 Pkt	2 Pkt
1778032729	0.33 Load	67.68 DegC	71 Mb	0 Pkt	0 Pkt
1778032432	0.29 Load	68.76 DegC	72 Mb	0 Pkt	0 Pkt
1778032128	0.32 Load	68.76 DegC	72 Mb	1 Pkt	2 Pkt
1778031832	0.3 Load	67.68 DegC	65 Mb	1 Pkt	0 Pkt
1778031529	0.29 Load	68.76 DegC	69 Mb	0 Pkt	0 Pkt
1778031229	0.3 Load	68.76 DegC	69 Mb	1 Pkt	2 Pkt
1778030929	0.31 Load	68.76 DegC	69 Mb	1 Pkt	0 Pkt
1778030632	0.32 Load	68.76 DegC	70 Mb	0 Pkt	0 Pkt

*Used Equation Coefficients:

Cpu: 0, 0.001, 0

Temp: 0, 0.001, 0

FreeM: 0, 1, 0

RxP: 0, 1, 0

TxP: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)