APRS Track Direct

My position About ☰

reset

IR2BY Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IR2BY. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Rx1h*	Dg10m*	DgR*	Eff1h*
1732267919	27 Pkt	120 Pkt	18 Pkt	2.25 Pcnt	83 Pcnt
1732267619	22 Pkt	130 Pkt	15 Pkt	2.25 Pcnt	84 Pcnt
1732267318	18 Pkt	120 Pkt	0 Pkt	2.24 Pcnt	86 Pcnt
1732267018	24 Pkt	130 Pkt	1 Pkt	2.24 Pcnt	88 Pcnt
1732266718	21 Pkt	120 Pkt	0 Pkt	2.24 Pcnt	87 Pcnt
1732266418	16 Pkt	120 Pkt	0 Pkt	2.24 Pcnt	89 Pcnt
1732266117	7 Pkt	110 Pkt	1 Pkt	2.24 Pcnt	88 Pcnt
1732265817	10 Pkt	110 Pkt	0 Pkt	2.24 Pcnt	89 Pcnt
1732265517	15 Pkt	120 Pkt	0 Pkt	2.24 Pcnt	89 Pcnt
1732265216	20 Pkt	120 Pkt	1 Pkt	2.24 Pcnt	88 Pcnt
1732264916	27 Pkt	120 Pkt	0 Pkt	2.24 Pcnt	86 Pcnt
1732264616	33 Pkt	130 Pkt	0 Pkt	2.24 Pcnt	85 Pcnt
1732264316	26 Pkt	120 Pkt	1 Pkt	2.24 Pcnt	87 Pcnt
1732264015	19 Pkt	120 Pkt	0 Pkt	2.24 Pcnt	85 Pcnt
1732263715	15 Pkt	130 Pkt	0 Pkt	2.24 Pcnt	84 Pcnt
1732263415	14 Pkt	130 Pkt	1 Pkt	2.24 Pcnt	83 Pcnt
1732263115	18 Pkt	130 Pkt	0 Pkt	2.24 Pcnt	81 Pcnt
1732262814	16 Pkt	120 Pkt	0 Pkt	2.24 Pcnt	81 Pcnt
1732262514	13 Pkt	130 Pkt	1 Pkt	2.24 Pcnt	81 Pcnt
1732262214	12 Pkt	130 Pkt	0 Pkt	2.24 Pcnt	82 Pcnt
1732261913	21 Pkt	140 Pkt	11 Pkt	2.24 Pcnt	82 Pcnt
1732261613	31 Pkt	140 Pkt	13 Pkt	2.24 Pcnt	80 Pcnt
1732261313	23 Pkt	130 Pkt	2 Pkt	2.24 Pcnt	81 Pcnt
1732261013	25 Pkt	120 Pkt	9 Pkt	2.24 Pcnt	81 Pcnt
1732260712	34 Pkt	140 Pkt	18 Pkt	2.24 Pcnt	79 Pcnt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

DgR: 0, 0.001, 0

Eff1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)