APRS Track Direct

My position About ☰

reset

YM2VGT Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YM2VGT. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	APRS*	220V*	Temp*	Rx1h*	Eff*
1754094522	13.1 Volt	8 Volt	19 C	790 Pkt	72 Pcnt
1754093922	13.1 Volt	8 Volt	19 C	830 Pkt	72 Pcnt
1754093321	13.1 Volt	8 Volt	19 C	820 Pkt	72 Pcnt
1754092764	13.1 Volt	8 Volt	19 C	820 Pkt	72 Pcnt
1754092721	13.1 Volt	8 Volt	19 C	840 Pkt	72 Pcnt
1754092120	13.1 Volt	8 Volt	19 C	820 Pkt	72 Pcnt
1754091981	13.1 Volt	8 Volt	19 C	820 Pkt	72 Pcnt
1754091567	13.1 Volt	8 Volt	19 C	840 Pkt	72 Pcnt
1754091519	13.1 Volt	8 Volt	19 C	820 Pkt	72 Pcnt
1754090919	13.1 Volt	8 Volt	19 C	840 Pkt	72 Pcnt
1754090318	13.1 Volt	8 Volt	19 C	820 Pkt	72 Pcnt
1754089718	13.1 Volt	8 Volt	18.5 C	830 Pkt	72 Pcnt
1754089118	13 Volt	8 Volt	18.5 C	800 Pkt	72 Pcnt
1754088517	13.1 Volt	8 Volt	18.5 C	800 Pkt	72 Pcnt
1754087918	13 Volt	7.9 Volt	18.5 C	770 Pkt	72 Pcnt
1754087818	13.1 Volt	8 Volt	18.5 C	750 Pkt	72 Pcnt
1754087317	-	-	-	-	-
1754087315	13.1 Volt	8 Volt	18.5 C	750 Pkt	72 Pcnt
1754086715	13.1 Volt	8 Volt	18.5 C	730 Pkt	72 Pcnt
1754086114	13.1 Volt	8 Volt	18.5 C	750 Pkt	72 Pcnt
1754085514	13.1 Volt	8 Volt	18.5 C	800 Pkt	72 Pcnt
1754084914	13.1 Volt	8 Volt	18.5 C	830 Pkt	72 Pcnt
1754084689	13.1 Volt	8 Volt	18.5 C	900 Pkt	72 Pcnt
1754084398	13.1 Volt	8 Volt	18.5 C	940 Pkt	72 Pcnt
1754084313	13.1 Volt	8 Volt	18.5 C	880 Pkt	72 Pcnt

*Used Equation Coefficients:

APRS: 0, 0.1, 0

220V: 0, 0.1, 0

Temp: 0, 0.5, -64

Rx1h: 0, 10, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)