APRS Track Direct

My position About ☰

reset

K1EQX-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object K1EQX-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1782488563	14.18 Volt	1110 Pkt	370 Pkt	63 Pcnt
1782486762	14.18 Volt	1110 Pkt	330 Pkt	65 Pcnt
1782484960	14.18 Volt	1170 Pkt	330 Pkt	64 Pcnt
1782483158	14.18 Volt	1270 Pkt	350 Pkt	65 Pcnt
1782481356	14.18 Volt	1230 Pkt	350 Pkt	65 Pcnt
1782479555	14.18 Volt	1180 Pkt	360 Pkt	62 Pcnt
1782477756	14.18 Volt	1170 Pkt	380 Pkt	63 Pcnt
1782475951	14.18 Volt	1120 Pkt	350 Pkt	65 Pcnt
1782474150	14.18 Volt	1140 Pkt	340 Pkt	65 Pcnt
1782472348	14.18 Volt	1150 Pkt	340 Pkt	67 Pcnt
1782470546	14.18 Volt	1090 Pkt	300 Pkt	66 Pcnt
1782468744	14.18 Volt	1090 Pkt	270 Pkt	67 Pcnt
1782466943	14.18 Volt	1140 Pkt	300 Pkt	68 Pcnt
1782465141	14.18 Volt	1180 Pkt	340 Pkt	69 Pcnt
1782463339	14.18 Volt	1180 Pkt	350 Pkt	68 Pcnt
1782461537	14.18 Volt	1160 Pkt	340 Pkt	67 Pcnt
1782459736	14.1 Volt	1180 Pkt	330 Pkt	67 Pcnt
1782457935	14.1 Volt	1190 Pkt	310 Pkt	66 Pcnt
1782456133	14.18 Volt	1210 Pkt	300 Pkt	65 Pcnt
1782454331	14.18 Volt	1260 Pkt	310 Pkt	68 Pcnt
1782452529	14.03 Volt	1290 Pkt	300 Pkt	70 Pcnt
1782450728	14.18 Volt	1310 Pkt	300 Pkt	68 Pcnt
1782448925	14.1 Volt	1370 Pkt	320 Pkt	68 Pcnt
1782447124	13.95 Volt	1320 Pkt	330 Pkt	67 Pcnt
1782445323	14.18 Volt	1230 Pkt	320 Pkt	65 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)