This is the latest recevied telemetry packets stored in our database for station/object ER-IR6UCQ. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1792220138 | 0 | 24 | 0 | 3 | 0 |
| 1792219837 | 7 | 70 | 1 | 8 | 0 |
| 1792219537 | 0 | 0 | 0 | 0 | 0 |
| 1792219237 | 0 | 59 | 0 | 3 | 0 |
| 1792218937 | 0 | 0 | 0 | 0 | 0 |
| 1792218638 | 0 | 9 | 0 | 1 | 0 |
| 1792218338 | 0 | 17 | 0 | 2 | 0 |
| 1792218037 | 0 | 81 | 0 | 5 | 0 |
| 1792217737 | 0 | 8 | 0 | 1 | 0 |
| 1792217437 | 0 | 0 | 0 | 0 | 0 |
| 1792217137 | 0 | 0 | 0 | 0 | 0 |
| 1792216837 | 0 | 43 | 0 | 1 | 0 |
| 1792216537 | 0 | 0 | 0 | 0 | 0 |
| 1792216238 | 0 | 0 | 0 | 0 | 0 |
| 1792215937 | 0 | 0 | 0 | 0 | 0 |
| 1792215637 | 0 | 50 | 0 | 2 | 0 |
| 1792215337 | 5 | 55 | 3 | 5 | 0 |
| 1792215038 | 0 | 8 | 0 | 1 | 0 |
| 1792214737 | 0 | 0 | 0 | 0 | 0 |
| 1792214437 | 0 | 43 | 0 | 1 | 0 |
| 1792214137 | 0 | 0 | 0 | 0 | 0 |
| 1792213837 | 0 | 0 | 0 | 0 | 0 |
| 1792213537 | 0 | 0 | 0 | 0 | 0 |
| 1792213237 | 0 | 43 | 0 | 1 | 0 |
| 1792212937 | 0 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)