APRS Track Direct

My position About ☰

reset

9M2ZEE Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9M2ZEE. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1778033697	1 Pkt	10 Pkt	-72 dBm	0.04 V
1778031874	1 Pkt	15 Pkt	-73 dBm	0.04 V
1778030051	1 Pkt	54 Pkt	-73 dBm	0.04 V
1778028227	1 Pkt	9 Pkt	-72 dBm	0.04 V
1778026405	1 Pkt	49 Pkt	-73 dBm	0.04 V
1778024580	1 Pkt	20 Pkt	-73 dBm	0.04 V
1778022757	1 Pkt	72 Pkt	-76 dBm	0.04 V
1778020932	1 Pkt	17 Pkt	-71 dBm	0.04 V
1778019109	1 Pkt	19 Pkt	-71 dBm	0.04 V
1778017287	1 Pkt	15 Pkt	-74 dBm	0.04 V
1778015464	1 Pkt	15 Pkt	-72 dBm	0.04 V
1778013641	1 Pkt	12 Pkt	-71 dBm	0.04 V
1778011819	1 Pkt	14 Pkt	-71 dBm	0.04 V
1778010001	1 Pkt	25 Pkt	-71 dBm	0.04 V
1778008172	1 Pkt	19 Pkt	-71 dBm	0.04 V
1778006350	1 Pkt	17 Pkt	-72 dBm	0.04 V
1778004527	1 Pkt	13 Pkt	-70 dBm	0.04 V
1778002705	1 Pkt	10 Pkt	-73 dBm	0.04 V
1778000883	1 Pkt	7 Pkt	-72 dBm	0.04 V
1777999061	1 Pkt	11 Pkt	-71 dBm	0.04 V
1777997238	1 Pkt	9 Pkt	-72 dBm	0.04 V
1777995415	1 Pkt	13 Pkt	-71 dBm	0.04 V
1777993592	1 Pkt	14 Pkt	-70 dBm	0.04 V
1777991770	1 Pkt	23 Pkt	-71 dBm	0.04 V
1777989947	2 Pkt	13 Pkt	-70 dBm	0.04 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)