This is the latest recevied telemetry packets stored in our database for station/object SN0PEK-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Vsolar* | SunElev* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1777973741 | -0.02 degC | 0 Volts | 52.42 deg | 0 | 0 |
| 1777972908 | -0.02 degC | 0 Volts | 52.11 deg | 0 | 0 |
| 1777972657 | -0.02 degC | 0 Volts | 51.98 deg | 0 | 0 |
| 1777972105 | -0.02 degC | 0 Volts | 51.7 deg | 0 | 0 |
| 1777971567 | -0.02 degC | 0 Volts | 51.29 deg | 0 | 0 |
| 1777971298 | -0.02 degC | 0 Volts | 51.07 deg | 0 | 0 |
| 1777970467 | -0.02 degC | 0 Volts | 50.29 deg | 0 | 0 |
| 1777970194 | -0.02 degC | 0 Volts | 49.97 deg | 0 | 0 |
| 1777969910 | -0.02 degC | 0 Volts | 49.66 deg | 0 | 0 |
| 1777967119 | -0.02 degC | 0 Volts | 45.67 deg | 0 | 0 |
| 1777966595 | -0.02 degC | 0 Volts | 44.76 deg | 0 | 0 |
| 1777966057 | -0.02 degC | 0 Volts | 43.79 deg | 0 | 0 |
| 1777965220 | -0.02 degC | 0 Volts | 42.41 deg | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.43, -80
Vsolar: 0, 0.1, 0
SunElev: 0, 0.3137, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)